H3C S5500-EI series Operation Manual page 1206

Operation Manual – File System Management
H3C S5500-EI Series Ethernet Switches
Note:
For H3C S5500-EI series Ethernet swithces, the file to be backed up or restored is the
main confiugration file for next startup.
II. Backing up the configuration file for next startup
Back up the configuration
file for next startup
Note:
Before backup, you should:
Ensure that the server is reachable, the server is enabled with TFTP service, and
the client has permission to read and write.
Use the display startup command (in user view) to verify if you have set the startup
configuration file, and use the dir command to verify if this file exists. If the file is set
as NULL or does not exist, the backup will be unsuccessful.
III. Restoring the startup configuration file
Restore the startup
configuration file
Note:
Before restoring a configuration file, you should ensure that the server is reachable,
the server is enabled with TFTP service, and the client has permission to read and
write.
After the command is successfully executed, you can use the display startup
command (in user view) to verify if the filename of the startup configuration file is the
same with the filename argument, and use the dir command to verify if the restored
file exists.
To do...
backup
startup-configuration to
dest-addr [ filename ]
To do...
restore
startup-configuration
from src-addr filename
Chapter 1 File System Management
Use the command...
Use the command...
1-11
Configuration
Remarks
Required
Available in user view
Remarks
Required
Available in user view