Enabling The Userloginwithoui Mode; Enabling Any Other Port Security Mode - H3C S5500-EI series Operation Manual

Operation Manual – Port Security
H3C S5500-EI Series Ethernet Switches
Enter system view
Enter Ethernet port view
Enable the autoLearn
mode
Note:
When a port operates in autoLearn mode, you cannot change the maximum number of
secure MAC addresses allowed on the port.

1.5.2 Enabling the userLoginWithOUI Mode

In userLoginWithOUI mode, a port supports one 802.1x user as well as users whose
MAC addresses have an OUI value among the specified ones.
Follow these steps to enable the userLoginWithOUI mode:
Enter system view
Set an OUI value for user
authentication
Enter Ethernet port view
Enable the
userLoginWithOUI mode
Note:
An organizationally unique identifier (OUI), the left-most 24 bits of a MAC address,
is a globally unique identifier assigned by IEEE to a certain manufacturer.
You can configure multiple OUI values.

1.5.3 Enabling any other Port Security Mode

Follow these steps to enable any other port security mode:
To do...
system-view
interface interface-type
interface-number
port-security port-mode
autolearn
To do...
system-view
port-security oui
oui-value index
index-value
interface interface-type
interface-number
port-security port-mode
userlogin-withoui
Chapter 1 Port Security Configuration
Use the command...
Use the command...
1-7
Remarks
—
—
Required
By default, a port operates
in noRestrictions mode.
Remarks
—
Optional
Not configured by default
—
Required
By default, a port operates
in noRestrictions mode.