H3C S5500-EI series Operation Manual page 1276

Operation Manual – System Maintaining and Debugging
H3C S5500-EI Series Ethernet Switches
II. Network diagram
Figure 3-1 Network diagram for remote upgrade
III. Configuration procedure
Configuration on FTP Server (Note that configurations may vary with different
types of servers)
# Enable FTP Server.
<FTP-Server> system-view
[FTP-Server] ftp server enable
# Set the FTP username to aaa and password to hello.
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
# Configure the user to have access to the aaa directory.
[FTP-Server-luser-aaa] service-type ftp ftp-directory flash:/aaa
Configuration on Device
Caution:
If the size of the Flash on the device is not large enough, delete the original application
programs from the Flash before downloading.
# Enter the following command in user view to log in to FTP Server.
<Device> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
3-8
Chapter 3 Device Management