To Add A Serial Command - Christie Entero RPMWU User Manual

To Add a DMX Channel Event
1. Click Add to open the RTE Wizard.
2. Select the DMX Channel Event tab.
3. Select a DMX channel (DMX-56 to DMX-61)
from the drop-down list as shown in Figure B-22.
Refer to Section 3 Operation
information.
B.3.7 To Add a Serial Command
1. Enter a serial command in the Serial Command
field. NOTE: See Appendix C: Serial Command
Overview and Appendix D: Serial Command
Reference.
2. Click Send to add the serial command. See Figure B-
23.
3. About Tabbed Page
Provides information about the projector's software
version, model, serial number, and license information.
NOTE: The information provided on the Version and
License tabs are read-only.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(06-2012)
for detailed
Appendix B: Web UI
Figure B-22 DMX Channel Event
Figure B-23 Add Serial Command
B-13