Christie Entero RPMWU User Manual page 204

Appendix D: Serial Command Reference
(TTM) THIC TRANSMITTER MODE CONFIGURATION
CONTROL GROUP:
DESCRIPTION
Select a working mode for one of the transmitters on the THIC card.
0 = 'Default' to select 12-bit per channel HDMI output
1 = 'Compatible' to select 8-bit per channel HDMI output
2 = 'DVI only' to select 8-bit per channel DVI output
SUBCODE
SLxy
EXAMPLES:
(TTM+SL11 0) - Use 12 bit HDMI output for THIC on Slot 1, Input 1.
(TTM+SL42 1) - Use 8 bit HDMI output for THIC on Slot 4, Input 2.
(TTM+SL11 2) - Use 8 bit DVI output for THIC on Slot 1, Input 1.
(TTM+SL12 ?) - Get the transmitter working mode for THIC on Slot 1, Input 2.
(TWP) TARGET WHITE POINT
CONTROL GROUP
DESCRIPTION
This command is used to set the ArrayLOC target white-point. Several preset white points are provided in
addition to 4 user setting white points. The control subcodes provide access to all the presets. Due to the large
number of sub-codes, they are not all listed. Instead a simple substitution for the small 'x' is made, according to the
following table:
0
1
2
3
4
5
6
7
8
C
D-70
Option Power Down
SUBCLASS:
Preference
SUBCLASS
:
ACCESS LEVEL:
DESCRIPTION OF USE
Set transmitter working mode for THIC card.
Power Up
ACCESS LEVEL
:
3200K
5000K (D50)
6500K (D65)
7500K (D75)
9300K (D93)
User 1
User 2
User 3
User 4
Current
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
:
020-100367-05 Rev. 1 (6-2012)