Editing A Channel; Channel Edit Menu - Christie Entero RPMWU User Manual

Editing a Channel

1. Press M
ENU
Main menu. To display the Channel Setup menu,
press 3 or move the highlight to the Channel Setup
option and press E
appear.
2. To edit parameters shown in the Channel Setup menu,
select the relevant channel and press E
Channel Edit menu will appear similar to the sample
illustration on the
3. If desired, review and/or edit the following channel
setups in the Channel Edit menu:

Channel Edit Menu

• NAME
An alphanumeric label can be defined and/or changed
here. Channel names can be up to 25 characters in length. The default name is the horizontal and vertical
sync frequencies.
• CHANNEL
A 2-digit channel number can be changed here.
NOTES: 1) If you enter a channel number that already exists, a dialog message appears indicating that this
number is already in use–assign a different channel number. 2) You can define up to 99 channels.
• SLOT
1-4, corresponding to which slot in the projector input panel the source is connected.
• INPUT
1-6, corresponding to which input on the selected slot the source is connected.
• IN MENU
If checked (default, except for automatically defined channels with unchanged parameters), this defined
channel will then appear in the list available when C
be accessed via C
NOTE: On-screen display of the channel list is an option that must be set in the Menu Preferences menu.
• AUTO SELECT
If checked, (default), the projector can automatically locate this channel when an incoming input signal
matches. If not checked, the projector can locate the selected channel only when it is directly selected via
C on the keypad, and a change in input signal will not result in a channel change.
HANNEL
• LOCKED
If checked, all of the image settings for this channel are locked. If unchecked (default), all available image
settings can be adjusted as desired. You cannot use Auto Setup with a locked channel.
• PREVIOUS CHANNEL
Select this option to see or change Channel Edit settings for the previous channel in the Channel Setup list.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)
from the presentation level to display the
. The Channel Setup menu will
NTER
right.
on the keypad or via the Auto Source function.
HANNEL
. The
NTER
key is pressed. If unchecked, the channel must
HANNEL
Section 3: Operation
3-15