Christie Entero RPMWU User Manual page 137

(ABL) ARRAY BRIGHT COLOR LOC (Cont'd)
SRGB
SACF
EXAMPLES:
(ABL+EABL 1) - Turn ON Array Bright/ColorLOC and run in Fixed mode
(ABL+BRGP 2) - Set the brightness group to 2
(ABL+BRTG 400) - Set the brightness target to 400 Lumens
(ABL+ADIN ?) - Return current value of adjustment interval in seconds
(ACE) AUTO COLOR ENABLE
CONTROL GROUP:
DESCRIPTION
Automatically select Color Enable based on the control being adjusted. If enabled, this control allows the
projector to automatically change the color enable control when the user is using the OSD interface to adjust
controls such as Input levels, odd pixel, and brightness uniformity. This is an unsaved control, which can only be
set when powered on, and only affects the operation of the On Screen menus.
SUBCODE
<No Subcode >
EXAMPLES
:
(ACE 0) - Disable Auto Color
(ACE 1) - Enable Auto Color
(ACO) ADAPTIVE CONTRAST
CONTROL GROUP
DESCRIPTION
Adaptive Contrast Enhancement dynamically expands the contrast of the output image producing vibrant images
with seamless response to scene changes and fades. The adaptive contrast function implements a dynamic non-
linear mapping between the Input and output contrast levels based on frame-by-frame luminance histogram
measurement of the Input image.
SUBCODE
INxy
MAIN
PIIP
EXAMPLES
:
(ACO 8) - Sets adaptive contrast for main image to 50% strength.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Preference
SUBCLASS:
Input
SUBCLASS
: :
Synchronize RGB Brightness setting amongst array projectors
0 = Independent
1 = Synchronized
Synchronize AccuFrame setting amongst array projectors
0 = Independent
1 = Synchronized
Power Up
ACCESS LEVEL
DESCRIPTION OF USE
Enable/Disable auto color controls.
Power Up
ACCESS LEVEL
DESCRIPTION OF USE
Set the adaptive contrast for SlotSlot x, Input y. Range 0-15.
Set the adaptive contrast for main video. Range 0-15.
Set the adaptive contrast for PIP video. Range 0-15.
Appendix D: Serial Command Reference
Operator
:
Operator
:
D-3