Christie Entero RPMWU User Manual page 150

Appendix D: Serial Command Reference
(CCD) OUTPUT COLOR DEFAULT
CONTROL GROUP:
DESCRIPTION
Specifies the default color adjustment to use for new channels. This allows the user to specify a standard color and
have that color applied by default to all new sources. The user may override this for any specific channel. Using
the default subcode applies a default to be used when creating a new channel using auto setup while the YNF is
not in the video path. Using the subcode DYNF allows a different color table default to be specified while the
YNF is in the video path during auto setup.
SUBCODE
<No Subcode >
DYNF
EXAMPLES:
(CCD 0) - Make new channels using the MAX drive table, while running auto setup and YNF is out.
(CCD+DYNF 4) - Make new channels using the HD table, while running auto setup and YNF is in.
(CCI) INTERPOLATED COLOR
CONTROL GROUP:
DESCRIPTION
This control generates an output color map based on interpolating the values for the standard color temperatures in
the range of 3200K-9300K. It effectively allows you to adjust the color temperature of the image. The selected
output color table must be on 'Color Temperature' to enable this control.
SUBCODE
INxy
MAIN
PIIP
EXAMPLE:
(CCI 9300) - Set the interpolated color temperature to 9300K for main video.
D-16
Preference
SUBCLASS:
Input Power Up
SUBCLASS:
Power Up
ACCESS LEVEL:
DESCRIPTION OF USE
Apply a default table to use while running auto setup when a
YNF filter is not in place.
Apply a default table to use while running auto setup when a
YNF filter is in place.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the interpolated color temperature for Slot x, Input y.
Set the interpolated color temperature for main video.
Set the interpolated color temperature for PIP video.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
020-100367-05 Rev. 1 (6-2012)