Christie Entero RPMWU User Manual page 192

Appendix D: Serial Command Reference
(RTE) REAL TIME EVENTS
CONTROL GROUP:
DESCRIPTION
Real time events allow custom user actions to occur based on a system trigger. There are various triggers in the
system such as power up, channel change, errors, or based on time. Time can be absolute, (e.g. 12:00:00 on
December 25, 2008) or relative (e.g. 5 hours and 30 minutes from now).
Special Function keys can also be used as a trigger. An example would be pressing F
can also be connected to external hardware triggers via the General Purpose IO port (GPIO).
EVENTS:
Single Occurrence Events:
(RTE T YYYY/MM/DD HH:MM:SS S "description" "command")
Daily Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD D R "description" "command")
Where the first date and time is the start date and occurrence time. The second date is the end date.
R is the "Repeat Every" interval i.e. repeat every R days
Weekly Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD W R "D" "description" "command")
Where the first date and time is the start date and occurrence time. The second date is the end date.
R is the "Repeat Every" interval i.e. repeat every R weeks
D is the weekday or weekdays that the command should run on:
M = Monday
Tu = Tuesday
I.E. "MT" will run on Monday and Tuesday "TTh" will run on Tuesday and Thursday "MTWFSSu" will run on
Monday, Tuesday, Wednesday, Friday, Saturday, and Sunday
Monthly Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD M R "description" "command")
Where the first date and time is the start date and occurrence time. The second date is the end date.
R is the "Repeat Every" interval i.e. repeat on the same date every R months
NOTE: If there are not 31 days in the next run cycle month, the event will not run in that month.
Function Key Events:
(RTE F K "description" "command"), where K = the specific function key (1-5,7-9). Key 6 is reserved and cannot
be used.
DMX Events:
(RTE M C "description" "command"), where C = channel (54-63)
System Events:
(RTE S E T "description" "command"), where E is the event to respond to:
D-58
Unsaved
SUBCLASS:
W = Wednesday
Th = Thursday
Power Down
ACCESS LEVEL:
F = Friday
S = Saturday
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
+1 on the remote. Events
UNC
Su = Sunday
020-100367-05 Rev. 1 (6-2012)