Table of Contents
Advertisement
Section 3: Operation
3.2.2 On-line Help
Press H
to display summary information about the current menu or highlighted option. Press H
ELP
exit.
3.2.3 The Global Icon
Menu options that include this icon apply universally. Menu options without this icon apply to the
selected channel only.
3.2.4 Using Slide bars and Other Controls
Most of the function menus allow you to change settings by using slide bars, check boxes, and drop-down lists.
Navigating options:
Enter the menu option number corresponding to the setting you wish to change (for example, press M
to select "Vertical Stretch" in the Size and Position menu).
• Move the highlight to the option desired and press E
• Move the highlight to the option desired and press L
number and the length of the bar change accordingly. See Figure 3-2. Hold for continuous adjustment.
• You can bypass the menus entirely and use a single key to immediately access an adjustment during your
presentation (applies only to options having their own key, such as C
• For "blind" access, hide the entire menu system (see
using the proper sequence of key presses.
Slide bars in menus: The current value for a given parameter, such as size or
vertical stretch, appears to the left of its slide bar icon (adjustment window). This
number often expresses a percentage, or it may have units associated with it (such
as pixels), depending on the specific option.
Press L
/R
EFT
IGHT
number and the length of the bar change accordingly. Hold for continuous adjustment.
Press E
to activate a slide bar text box for specific number entry via the keypad and then press E
NTER
save (or press E
"Direct" slide bars: For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the
menu system. Press G
to adjust a direct slide bar, or press E
A
key or R
RROW
to your presentation.
3-8
arrow key to gradually adjust the setting up or down—both the
to cancel).
XIT
, B
AMMA
RIGHTNESS
NTER
arrow key to save (or E
IGHT
.
NTER
/R
arrow key to adjust immediately. Both the
EFT
IGHT
OSD (On-screen display), on page
, or C
to display the contrast slide bar. Use the arrow keys
ONTRAST
and enter a specific number from the keypad, then E
to cancel). When you are done, press E
XIT
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
, B
, G
ONTRAST
RIGHT
AMMA
3-5) and access
Figure 3-2 Slide Bar
Example
to save and return
XIT
020-100367-05 Rev. 1 (06-2012)
again to
ELP
1 3
ENU
, etc.).
to
NTER
or L
NTER
EFT
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
