Signal Type - Christie Entero RPMWU User Manual

NOTE: Use U
channels.

Signal Type

The channel list or the Channel Setup menu, identifies signal types abbreviations as defined below in
Table 3.2. Composite Sync is on the H/C input or the V input (4-wire). These abbreviations are preceded by
either an 'i' (interlaced signals) or 'p' (progressive signal).
Abbreviations for Signal Type
Table 3.2 -
Abbrev.
-- No Sync
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green (4 wire)
5W Separate H,V (5-wire)
5WR Separate H,V swapped (5-wire)
SVid S-Video
CVid Composite Video
Dig Digital
DSDI Digital Dual Link HD-SDI
DVI Digital DVI
HDMI Digital HDMI
HSDI Digital HD-SDI
SDI Digital SDI
The first 5 items in this table are analog RGB with various sync combinations indicating Sync Source when
editing the channel.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)
and D arrow keys to see the remaining channels not visible in the initial display of
P OWN
Signal Type
Section 3: Operation
3-13