Christie Entero RPMWU User Manual page 195

(SIN) SELECT INPUT (Cont'd)
SUBCODE
MAIN
PIIP
EXAMPLES:
(SIN 12) - Set main video to Slot 1, Input 2.
(SIN+MAIN 45) - Set main video to Slot 4, Input 5.
(SIN+PIIP 21) - Set picture in picture video to Slot 2, Input 1.
(SIN?) - Get the current main video Input (SIN!12).
(SIN+MAIN?) - Get the current main video Input (SIN+MAIN!12).
(SIN+PIIP?) - Get the current (picture in picture) PIP video Input (SIN+PIIP!21).
(SIZ) SIZE
CONTROL GROUP:
DESCRIPTION
This controls how much the projector will electronically expand or shrink the image. It will expand/contract the
image in both the vertical and horizontal directions so that the aspect ratio will not change. 1000 is the neutral
position where no resizing is done. Scale = value / 1000. The horizontal scaling of the image is always to exactly
this value but the vertical scale is also controlled by the VST control which stretches the image vertically. When
size is changed on PIP video, nothing will visually happen. It gets saved in the PIP's channel and will be applied
the next time that channel is on main video.
SUBCODE
<No Subcode >
EXAMPLES:
(SIZ 500) - Set size to 500 on main video.
(SIZ?) - Returns the size value on main video.
(SMP) SAMPLING MODE
CONTROL GROUP:
DESCRIPTION
This control sets the color sampling mode for a digital signal to either YCbCr 4:4:4, RGB or YCbCr 4:2:2.
Although the proper sampling mode is determined automatically by the projector, you can override the setting.
Valid values are:
0 = YCbCr 4:4:4 (or RGB)
1 = YCbCr 4:2:2
SUBCODE
INxy
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Input Power Down
SUBCLASS:
Input Power Up
SUBCLASS:
Appendix D: Serial Command Reference
DESCRIPTION OF USE
Set the active Input for the main video.
Set the active Input for the (picture in picture) PIP video.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the size for the main image.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the sampling mode on Slot x, Input y.
Operator
Operator
D-61