Adjusting The Image; Automatic Image Setup - Christie Entero RPMWU User Manual

Section 3: Operation
• NEXT CHANNEL
Select this option to see or change Channel Edit settings for the next channel in the Channel Setup list.
3.4

Adjusting the Image

The most commonly-used options for image adjustments are accessed through two menus: Size and Position
(M then 1) and Image Settings (M
ENU
settings affecting the image from the current channel by working with the appropriate slide bars, check boxes
and drop-down lists from either of these two menus. E
if from the Main menu) and accepts any changes you may have entered. Settings are saved with the current
channel. From your presentation, you can access any of the individual options in these menus by pressing
M followed by the appropriate number keys representing their location in the menu system. For example,
ENU
press M then 2 then 7 then 1 to quickly access the "Gamma Settings" option in the Image Settings >
ENU
Advanced Image Settings menu.
NOTES: 1) Some frequently used display functions have dedicated
keys on the IR remote. For example, press C
contrast slide bar. Press E
hide "direct" slide bars, disable the Display Slide bars check box
in the Menu Preferences menu. 3) To hide the entire menu system
from view, turn off the on-screen display by pressing OSD then the
D Arrow Key.
OWN

3.4.1 Automatic Image Setup

Auto setup is a good first step in setting up the image. Press A
display parameters such as size, position, pixel tracking, etc., based on the type of incoming source. An Auto
Setup can save considerable setup time, and you can still adjust the image as described below.
The best auto setup will be obtained under the following conditions:
• Input levels: It is best to have an image with saturated (very Bright) colors.
• Phase: High contrast edges are needed.
To determine active window size:
• Video images should have whites and blacks in the image
• Wide range video images should have content (including white) that extends to all edges of the image.
3-16
then 2), both of which appear in the Main menu. You can change
ENU
ONTRAST
to return to your presentation. 2) To
XIT
returns to the previous menu (or to the presentation,
XIT
to access the
on the remote. This optimizes critical
UTO
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)