Christie Entero RPMWU User Manual page 175

(MCS) MENU CASCADING ENABLE
CONTROL GROUP:
DESCRIPTION
Enable or disable cascading menus. When disabled, a single menu level will be displayed at a time.
SUBCODE
<No Subcode >
EXAMPLES:
(MCS ?) - Get the current state of this setting.
(MCS 0) - Disable cascading menus.
(MCS 1) - Enable cascading menus.
(MDE) SERIAL MODE
CONTROL GROUP:
DESCRIPTION
Set the mode for a serial communications port. Settings such as bits, parity and stop bits are grouped together into
one selection.
SUBCODE
PRTA
PRTB
PRTC
EXAMPLES:
(MDE+PRTA 0) - Set mode on port A to 8-bit, no parity, 1 stop bit.
(MDE+PRTA 1) - Set mode on port A to 7-bit, even parity, 1 stop bit.
(MDE+PRTA 2) - Set mode on port A to 7-bit, odd parity, 1 stop bit.
(MDE+PRTA?) - Get mode (MDE+PRTA!000 "8N1").
(MFT) MENU FONT
CONTROL GROUP:
DESCRIPTION
Set the font size used by OSD.
SUBCODE
<No Subcode >
EXAMPLES:
(MFT ?) - Get current font option used by the OSD. 0 is small font, 1 is large font.
(MFT 1) - Use large font as the OSD font.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Preference
SUBCLASS:
Preference
SUBCLASS:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Enable or disable cascading.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Set the mode on port A (RS-232 In).
Set the mode on port B (RS-232 Out).
Set the mode on port C (RS-422).
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
View/Set Choose large font or small font as the font used by
OSD.
Appendix D: Serial Command Reference
Operator
Advance
Operator
D-41