Reset ILS File Settings
You must reset the Intelligent Lens System (ILS) when you move the lens, you have manually
adjusted horizontal or vertical offset, focus, or zoom or when a power outage occurs during a channel
change.
1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. Tap Quick Reset.
4. Tap Yes.
Add a Lens Serial Number
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Tap the Launch Dialog
4. Enter the serial number for the lens and then tap Enter.
5. Tap Save.
Enable Automatic ILS on a Lens
Use this procedure to move the lens to a position specified by the channel settings.
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Select Enable Automatic ILS in the Intelligent Lens System area.
Reset the Lens Position on Projector Startup
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Select Reset on Startup in the Intelligent Lens System area.
Complete a Full Lens Calibration
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
icon in the Serial Number field.
Manage Projector Setting Files
49