Christie Entero RPMWU User Manual page 72

Section 3: Operation
• Red/green/blue part of blue changes the system color to blue.
• All other menu options change the system color to white.
The color resets automatically when you exit the menu.
Test Pattern Enable
Check this option to enable the automatic display of a flat white test pattern when you select the Array
Color Target menu.
The test pattern is turned off automatically when you exit the menu.
Copy Adjustments From
Copies the adjustment values from the selected color space to the current color space.
White Brightness Adjustment
Use this option to adjust the RGB brightness for the projector.
ArrayLOC Status
Use this option to review the capabilities of the specified group of projectors (see
on page 3-53).
Total number of
projectors in same
Bright/ColorLOC
ArrayLOC Status
rgb
Flags
W
wW*
The ArrayLOC status window (Figure 3-15) includes the following information:
• The target gamut and calculated common gamut are shown in the same format as the projector data
below. For the common gamut, if it is smaller than the target gamut this is indicated in the flags column
with < Target.
• The Flags column uses several characters to identify projectors within the array:
•The least red projector is identified with a lowercase r.
•The least green projector is identified with a lowercase g.
•The least blue projector is identified with a lowercase b.
3-52
Primary coordinates from
Array Color Target menu
group
2 User 1 600 300
0 Common Gamut 600 300
ProjID Group WBA Rx Ry
1 211 100 706 294 390.8 210 745 678.2 137 034 77.7
0 213 100 701 296 362.9 210 747 679.1 145 023 57.5
Figure 3-15 ArrayLOC Status
White coordinates from Array
Color Target menu
210 650 153 060
210 600 153 060
RY Gx Gy GY Bx By
Primary coordinates of Array
common gamut
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
ArrayLOC Status Filter,
RGB Brightness
from Array Color
Target menu
313 329 600
313 329 371
BY Wx Wy WY
313 329 375.5
313 329 371.2
Common
brightness
020-100367-05 Rev. 1 (06-2012)