Christie Entero RPMWU User Manual page 73

•The dimmest projector is identified with a lowercase w.
•The projector with white brightness capability less than Target brightness is identified with an
uppercase W.
• Any projector with broadcast mode enabled is identified with an asterisk * if broadcasting to its Bright/
Color group.
•The Proj ID column shows the projector array ID.
•The Group column shows the projector Bright/Color group #.
•The WBA column shows the projector white brightness adjustment.
•The Rx, Ry, and RY columns show the red CIE 1931 x, CIE 1931 y and CIE 1931 Y capability of
the projector. The Y capability is the product Y grossed-up intensity of the projector and its current
red duty cycle on time.
•The Gx, Gy, GY, Bx, By, and BY columns show the green and blue capability of the projector.
•The Wx, Wy and WY show the white capability of the projector. The white capability of the pro-
jector is calculated as the sum of the red, green and blue capability, scaled by the current duty cycle
of the projector.
ArrayLOC Status Filter
Use this option to specify which projectors are included in the ArrayLOC Status report.
• Group, Min Capability includes projectors in the array that meet targets.
• Group includes all projectors in the ArrayLOC group.
• None includes all the projectors detected in the ArrayLOC network.
ArrayLOC Configuration
ArrayLOC Network
Select the projector-to-projector communica-
tion network configuration for all Ethernet
messages related to ArrayLOC functions,
including ArrayLOC messages, and BCLOC
messages.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)
Section 3: Operation
3-53