Blanking - Christie Entero RPMWU User Manual

Section 3: Operation

Blanking

Active Input Window
This read-only value indicates the current size of your displayed data or "region of interest" as defined by the
blanking controls. By default, the projector automatically determines what portion of its full resolution to use,
and pixels in the surrounding borders are turned off. Specify the active input window size by adjusting one or
more "Blank" settings (Figure 3-5). For example, if you have blanked (cropped) 100 pixels from both the left
and right edges of an incoming source of 1400 x 1050, the remaining active input window will be reduced to
1200 x 1050.
Blanking (Top, Bottom, Left, and Right)
Crop the image so that unwanted edges are removed from the display
(changed to black). Blanking defines the size of the Active Input
Window, or area of interest. Range of adjustment depends on the source
resolution and other factors.
NOTE: Blanking a PIP image resembles zoom. For example, left
Blanking zooms the right side of the PIP image; Right Blanking zooms
the left side. There are no black bars.
3-20
Figure 3-6 Blanking of a PIP Image
Figure 3-5 Blanking of
a Primary Image
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)