Projector Info (Pif); Serial Command Functions - Christie G Series Application Manual

Examples
Command
(MDT?)
(MDT+HPOS123)
(MDT+SAVE1)
(MDT+CLER1)

Projector Info (PIF)

Use this command to return projector information. This command can only be run when the
projector is in service mode.
Subcode
Subcode
MDLN
SNUM
NERS
FWVS
CFVS
BCVS
Read/Write
Read only.
Examples
Command
(PIF+MDLN?)

Serial Command Functions

This section lists the functions that are used by serial command.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Returns the current mode adjustment settings.
Applies a horizontal offset to the specified position.
Saves the MDT settings.
Clears the MDT settings.
Returns the model name.
Returns the serial number.
Returns the native resolution.
Returns the firmware version.
Returns configuration information.
Returns the boot code.
Returns the model name.
Description
Description
Description
Commands
59