Lce-Last Serial Command Error; Ldi-Laser Diode Information; Lho-Lens Shift Horizontal - Christie 599 GS Series Technical Reference

LCE–Last Serial Command Error
Displays the last serial command error.
Commands
Command Description
LCE? Returns the last serial command error. (Read-only)
LDI–Laser Diode Information
Displays the information of each laser diode bank including its voltage and temperature.
Commands
Command Description
LDI+LDV1 Displays the current voltage status for laser diode 1. (Read-only)
LDI+LDV2 Displays the current voltage status for laser diode 2. (Read-only)
LDI+LDV3 Displays the current voltage status for laser diode 3. (Read-only)
LDI+LDV4 Displays the current voltage status for laser diode 4. (Read-only)
LDI+LDV5 Displays the current voltage status for laser diode 5. (Read-only)
LDI+BT1 Displays the temperature status for bank 1. (Read-only)
LDI+BT2 Displays the temperature status for bank 2. (Read-only)
Examples
Display the information for the laser diode bank 1:
(LDI+LD01)
LHO–Lens Shift Horizontal
Adjusts the horizontal lens offset.
Commands
Command Description
LHO <position> Adjusts the horizontal location of the lens.
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
—
Values
—
—
—
—
—
—
—
Values
n = Increases horizontal location of the lens
by one
p = Decreases horizontal location of the lens
by one
35