Christie Entero RPMWU User Manual page 161

(FAS) FAN ASSIST SWITCH
CONTROL GROUP:
DESCRIPTION
Enables or disables the ability for all fans to operate at maximum speed during a thermal over-temp condition.
SUBCODE
<No Subcode >
EXAMPLES:
(FAS 1) - Turn ON fan assist.
(FAS 0) - Turn OFF fan assist.
(FIL) FILTER
CONTROL GROUP:
DESCRIPTION
Apply an internal Low Pass Filter to the current Input signal, before the A/D conversion in analog cards. This
removes high frequency noise from Input signals. HDTV is typically used for 720p and 1080i video sources. The
high bandwidth filter should be used for 1080p or higher frequency sources. Valid values are:
0 = OFF
1 = HDTV-High Bandwidth
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(FIL 2) - Set the filter for main video to HDTV.
(FIL+MAIN 2) - Set the filter for main video to HDTV.
(FIL+IN32 2) - Set the filter for Slot 3, Input 2 to HDTV.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Saved Power Down
SUBCLASS:
Input Power Up
SUBCLASS:
Appendix D: Serial Command Reference
ACCESS LEVEL:
DESCRIPTION OF USE
ACCESS LEVEL:
2 = HDTV
3 = EDTV
4 = SDTV
DESCRIPTION OF USE
Set the filter for Slot x, Input y.
Set the filter for Main video.
Set the filter for PIP video.
Operator
Operator
D-27