Table of Contents
Advertisement
Performing a Diagnostic Test using Interrogator
1. Click Interrogate to initiate the diagnostic test and download the diagnostic test results to your computer.
A Interrogator in Progress bar appears. Once the download is complete, a File Download window
appears. NOTE: Once the Interrogate function begins, you must allow it to run until completion.
2. Click Save to save the diagnostic test results file to your Network drive or hard-drive.
B.3.5 Admin Tab - Users
Under the Admin tab, select the Users secondary tab. Options are provided to add to and delete users from
accessing the projector, and change passwords. NOTES: 1) Do not use capitalization for usernames or
passwords. If capitalization is used for the username or password, it will automatically convert it to lower
case. 2) Usernames can be a minimum of 4 and maximum of 32 characters. Passwords can be a minimum of 4
and maximum of 128 characters.
Creating a User Name and Password
1. Click Add User to open the Add User window. See Figure B-11.
2. Type your username and password in the User name and Password
fields respectively.
3. Re-type your password in the Re-type Password field.
4. Click Ok to save.
Change Password
1. Select the user whose password you wish to change from the
Users window.
1. Click Change Password to open the Password Change
window. See Figure B-12.
2. Type the new password in the Password field.
3. Re-type the password in the Re-type Password field.
4. Click Ok to save or Cancel to ignore.
Delete User
1. Select the user that you wish to remove from the Users window. See
Figure B-13
2. Click Delete User to open the Delete User window. A confirmation
message appears.
3. Click Yes or No to proceed or ignore the action.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(06-2012)
.
Appendix B: Web UI
Figure B-11 Add User window
Figure B-12 Password Change window
Figure B-13 Delete User window
B-9
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
