Christie Entero RPMWU User Manual page 142

Appendix D: Serial Command Reference
(ASH) AUTO SHUTDOWN
SBTO
ALTO
EXAMPLES:
(ASH 1) - Turn ON Auto Shutdown Mode.
(ASH 0) - Turn OFF Auto Shutdown Mode.
(ASH+SBTO 10) - Set standby time-out to 10 minutes.
(ASH+ALTO 10) - Set source activity loss time-out to 10 minutes.
(ASR) AUTO CHANNEL SELECT
CONTROL GROUP:
DESCRIPTION
The Auto Channel Select (ASR) option allows the projector to select the channel memory best suited to the Input
signal. If the current channel does not allow Auto Channel Select, the projector will not attempt to select a new
channel when the signal changes. If the current channel does allow Auto Channel Select, then upon signal
detection, an existing channel will be chosen. If a match is not found a new channel will be created.
SUBCODE
C0xx
MAIN
PIIP
EXAMPLES:
(ASR?) - Get Auto Channel Select state for channel being used by main.
(ASR+MAIN?) - Get Auto Channel Select state for channel being used by main.
(ASR+PIIP?) - Get Auto Channel Select state for channel being used by PIP.
(ASR 1) - Enable Auto Channel Select for the channel being used by main.
(ASR+PIIP 1) - Enable Auto Channel Select for the channel being used by PIP.
(ASR+MAIN 0) - Disable Auto Channel Select for the channel being used by main.
(ASR+C001 0) - Disable Auto Channel Select for channel 1.
D-8
Channel
SUBCLASS:
Set the uninterrupted time-out period that must elapse before
projector will enter Standby Mode (The second time-out
period or Standby time-out).
Set the uninterrupted time-out period that must elapse time of
activity loss until Auto Shutdown is activated (The first time-
out period or Activation time-out).
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Enable/disable Auto Channel Select on channel (xx=channel
number from 01 to 99).
Enable/disable Auto Channel Select on the channel being used
by main.
Enable/disable Auto Channel Select on the channel being used
by PIP.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
020-100367-05 Rev. 1 (6-2012)