Christie Entero RPMWU User Manual page 184

Appendix D: Serial Command Reference
(PPA) POSITION PRESET ASPECT
CONTROL GROUP:
DESCRIPTION
When enabled, this control ensures that during auto setup for any source, its aspect ratio is maintained when its
default size is calculated. This is similar to cases where a stretch is defined for a source in the lookup table. If
disabled and no stretch is defined, the source is scaled to fit the screen.
SUBCODE
<No Subcode >
EXAMPLES:
(PPA 0) - Disables maintain aspect during auto setup.
(PPA 1) - Enables maintain aspect during auto setup.
(PPP) PIP POSITION PRESET
CONTROL GROUP:
DESCRIPTION
Choose a preset location and size for the PIP window. The Location settings will adjust the size and position of the
window. Blanking will not be affected. While in split screen mode, several channel controls that resize image will
be disabled. These controls are size, H-Position and V-Position. Valid values are:
0 = Top Right
1 = Top Left
2 = Bottom Left
3 = Bottom Right
SUBCODE
<No Subcode >
EXAMPLE:
(PPP 0) - Select top right preset position.
(PPS) PIP SWAP
CONTROL GROUP:
DESCRIPTION
This control swaps the current main and PIP Inputs. It will swap the Inputs regardless if there are valid signals on
either of the Inputs.
SUBCODE
<No Subcode >
EXAMPLE:
(PPS) - Swap Inputs.
D-50
Preference
SUBCLASS:
Preference
SUBCLASS:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
This command accepts either 0 or 1. 0 = disables maintain
aspect, 1 = enables maintain aspect.
Power Up
ACCESS LEVEL:
DESCRIPTION OF USE
Power Up
ACCESS LEVEL:
DESCRIPTION OF USE
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
Operator
020-100367-05 Rev. 1 (6-2012)