Christie Entero RPMWU User Manual page 168

Appendix D: Serial Command Reference
(GOO) GREEN ODD PIXEL OFFSET
CONTROL GROUP:
DESCRIPTION
Adds an offset to Input green black level settings on the analog Input card. It is used to compensate for differences
between the A to D converter used to sample even pixels, and the one used for odd pixels. A value of 0 is the null
position in which both A to D converters are set to exactly the same value.
SUBCODE
SLx0
EXAMPLE:
(GOO+SL10 -10) - Set a green black level offset to -10 on Slot 1.
(HDC) DHDC DUAL-LINK CONFIGURATION
CONTROL GROUP:
DESCRIPTION
Select whether to use the 2 Inputs as separate Inputs, or combined as a dual-link. Select 'Automatic' to let the card
decide, based on the Input signal. If the card cannot determine this, it will assume 2 single links. Valid values are:
0 = Automatic
1 = 2 Single Links
2 = Dual Link
SUBCODE
SLx0
EXAMPLES:
(HDC+SL10 0) - Use Automatic detection for DHDIC on Slot 1.
(HDC+SL40 1) - Use 2 Single Links for DHDIC on Slot 4.
(HDC+SL10 2) - Use Dual-link for DHDIC on Slot 1.
(HDC+SL10 ?) - Get the current dual-link mode for DHDIC on Slot 1.
(HLP) SERIAL HELP
CONTROL GROUP:
DESCRIPTION
Query a list of all available serial commands, with brief descriptions and current enabled states.
SUBCODE
<No Subcode >
EXAMPLES:
(HLP?) - Retrieve entire command Help listing.
(HLP? "BRT") - Retrieve all subcodes/descriptions/enables for BRT control.
D-34
Option Power Up
SUBCLASS:
Option Power Down
SUBCLASS:
Unsaved
SUBCLASS:
ACCESS LEVEL:
DESCRIPTION OF USE
Set a green black level offset for the second A to D.
ACCESS LEVEL:
DESCRIPTION OF USE
Set a single/dual-link mode for the DHDIC.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Request entire command Help listing, or list for a single
command.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
Operator
020-100367-05 Rev. 1 (6-2012)