Christie Entero RPMWU User Manual page 197

(SPS) SPLASH SCREEN (Cont'd)
SUBCODE
<No Subcode >
SLCT
EXAMPLES:
(SPS ?) - Get the display option. If 0, logo is always OFF. 1, logo is displayed at start up, etc.
(SPS 2) - Set the display option. Logo will be displayed when there is no signal.
(SPS+SLCT 0) - Use Christie logo.
(SPT) SPLIT SCREEN
CONTROL GROUP:
DESCRIPTION
Split screen enable control. Allows a snap shot of the main image to be presented on the right side of the screen to
allow evaluation of advanced image processing features. All resizing controls are honoured on both images.
However, image processing controls only happen on the left side image. Changing Inputs, channels or test
patterns will disable this control. PIP operation must be disabled prior to enabling this control.
Valid options are:
0 = OFF
1 = Side
2 = Top
SUBCODE
<No Subcode >
EXAMPLES:
(SPT 1) - Turn ON split screen to the side.
(SPT 0) - Turn OFF split screen.
(SST) SYSTEM STATUS
CONTROL GROUP:
DESCRIPTION
Retrieve the various system status groups.
SUBCODE
<No Subcode >
ALRM
CONF
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Unsaved
SUBCLASS:
Preference
SUBCLASS:
DESCRIPTION OF USE
View/Set option indicating when a logo is displayed. Valid
values are:
0 = Always OFF
1 = Display on Startup only
2 = Display on Startup and when there is no Signal
View/Set which logo to display. Valid values are:
0 = Default Splash Screen
1 = User Splash Screen
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Returns information on all status groups, with one message per
item.
Returns a summary of any active alarms.
Returns configuration data - model, sn, build date, etc.
Appendix D: Serial Command Reference
Status
Status
D-63