Christie Entero RPMWU User Manual page 180

Appendix D: Serial Command Reference
(NTR) NETWORK ROUTING
CONTROL GROUP:
DESCRIPTION
Set routing for ASCII messages.
SUBCODE
<No Subcode >
EXAMPLES:
(NTR?L) - List routing options.
(NTR 0) - Set routing so that each connection is routed separately.
(NTR 3) - Set routing to full daisy-chaining.
(OPP) ODD PIXEL PHASE
CONTROL GROUP:
DESCRIPTION
Adds an offset to the pixel phase setting on this card. It is used to compensate for differences between the A to D
converter used to sample even pixels, and the one used for odd pixels. A value of 0 is the null position in which
both A and D converters are set to exactly the same value.
SUBCODE
SLx0
EXAMPLES:
(OPP+SL10 -1) - Set a pixel phase offset to -1 on Slot 1.
(OSD) ON SCREEN DISPLAY
CONTROL GROUP:
DESCRIPTION
Display or Hide the OSD screen.
SUBCODE
<No Subcode >
EXAMPLES:
(OSD ?) - Get current state of OSD. 0 when OSD is hidden, 1 when OSD is displayed.
(OSD 0) - Turn OFF OSD display. The OSD will run in the background, even though it is not visible.
D-46
Preference
SUBCLASS:
Option Power Up
SUBCLASS:
Unsaved
SUBCLASS:
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Used to enable or disable daisy chaining.
0 = RS-232, RS-422 & Ethernet communications are all
separate from one another
1 = RS-422 port(s) is/are connected to the RS-232 network
2 = The Ethernet port is connected to the RS-232 network
3 = RS-232, RS-422 & Ethernet are all connected to each other
ACCESS LEVEL:
DESCRIPTION OF USE
Set a pixel phase offset for the second A to D.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Turn ON/OFF OSD display.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
Operator
020-100367-05 Rev. 1 (6-2012)