Uploading A Logo File Or Gamma File; Creating A Backup File; Restoring A File - Christie Entero RPMWU User Manual

Appendix B: Web UI

Uploading a Logo File or Gamma File

Important: The projector must be powered on to enable the Upload drop-down list.
1. Select the file type (Logo or Gamma) from the Upload drop-down list.
NOTE: If you select a Logo file type, it MUST be a 24-bit, bitmap file. This enables the Logo Position and
Background Color section. Proceed to Step 3a.
2. If you select a Gamma file type, it MUST be a .csv file with 1024 values (all colors same) or 1024 x 3 for
individual colors. This enables the Gamma Properties section. Proceed to Step 4a.
a. Enter the Logo position for the X and Y fields.
b. Click the Color square to open the Choose Background Color window, choose the desired
background color from the color palette, and click OK. The color square changes to the selected color.
c. Click the Upload button to display the Logo Upload window. Click Yes or No to confirm or cancel the
upload.
An Upload in Progress window appears.
3. Click the Upload Browse button to open the Choose file window.
4. Locate and select the file you wish to upload from a Network drive location or from your hard drive.
5. Click the Upload button to display the Logo Upload window.
a. Enter a descriptive name in the Display Name field.
b. Click the Upload button to display the Gamma Upload window. Click Yes or No to confirm or cancel
the upload respectively.
An Upload in Progress window appears.

Creating a Backup File

1. Select a file type (All, Preferences, Configuration, Channels, or Users) from the Backup drop-down list.
2. Click Backup to initiate the download. A Backup in Progress bar appears. Once finished, a File
Download window appears.
3. Click Save to open a Save As window.
4. Locate and select a folder within your Network drive or hard-drive where you wish to save the file.
5. Click Save.

Restoring a File

1. Select a file type (All, Preferences, Configuration, Channels, Users or Real Time Events) from the
Restore drop-down list. NOTE: Do not select All unless transferring all files from one projector to
another or cloning.
2. Click the Browse button to locate and select the file you wish to restore from a Network drive location or
from your hard drive.
3. Click Restore to initiate the restore. A Restore in Progress bar appears. Once finished, a confirmation
message appears.
B-8 Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)