Christie Entero RPMWU User Manual page 183

(PIP) PICTURE IN PICTURE
CONTROL GROUP:
DESCRIPTION
This control enables or disables 'Picture in Picture' (PIP) mode, or 'Picture by Picture' (PBP) mode.
PIP and image transition effects (seamless switching) both require resources to configure a second image
processing path. Therefore these two features cannot be active at the same time.
SUBCODE
<No Subcode >
EXAMPLES:
(PIP 0) - Disables PIP video.
(PIP 1) - Enables PIP video.
(PIP 2) - Enables PBP video (picture-by-picture).
(PIP ?) - Returns the state of the PIP control. i.e. (PIP! 1) - PIP enabled.
(PJH) PROJECTOR HOURS
CONTROL GROUP:
DESCRIPTION
Reports the number of hours elapsed on the projector. This control is read-only.
SUBCODE
<No Subcode >
EXAMPLE:
(PJH ?) - Returns hours elapsed on projector.
(PNG) PING
CONTROL GROUP:
DESCRIPTION
This command returns basic projector information to the user which includes the type of device & main software
version. Note that some devices have multiple CPUs each with its own software version. Only the software
version of what is considered to be the master CPU, is returned here. The return parameters are: Type, Major,
Minor, Beta. The beta value is optional meaning it is an engineering build and has not been validated.
NOTE: List of devices: 40 = ACT, 41 = Cinema, 42 = CinemaMini, 43 = Media Block, 44 = Mobius, 45 = Entero/
StIM.
SUBCODE
<No Subcode >
EXAMPLE:
(PNG?) - (PNG!41 001 000 234) Indicates 'Cinema' type, software: 1 major, 0 minor, 234 beta.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Preference
SUBCLASS:
Unsaved
SUBCLASS:
Configuration
SUBCLASS:
Power Up
ACCESS LEVEL:
DESCRIPTION OF USE
0 = Disables PIP.
1 = Enables PIP.
2 = Enables PBP.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Power Down
DESCRIPTION OF USE
Appendix D: Serial Command Reference
Operator
Operator
Status
ACCESS LEVEL:
D-49