Christie Entero RPMWU User Manual page 187

(PXT) PIXEL TRACKING
CONTROL GROUP:
DESCRIPTION
Pixel Tracking adjusts the position of the pixel sampling clock to match the Input signal. It can only be set on
Analog Input cards. If adjusted incorrectly, flickering or vertical bars of noise appear across the image. Adjust
Pixel Tracking so that the noise either disappears or fills the image. If it fills the image, use Pixel Phase to
eliminate the noise. The range is 600-4095.
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(PXT 600) - Set pixel tracking to 600 on main video.
(PXT+MAIN 600) - Set pixel tracking to 600 on main video.
(PXT+PIIP 600) - Set pixel tracking to 600 on PIP video.
(PXT+IN32 600) - Set pixel tracking to 600 on Slot 3, Input 2.
(PXT?) - Returns the pixel tracking value on main video.
(PXT+PIIP?) - Returns the pixel tracking value on PIP video.
(PXT+IN12?) - Returns the pixel tracking value on Slot 1, Input 2.
(RAL) REMOTE ACCESS LEVEL
CONTROL GROUP:
DESCRIPTION
Set the remote serial protocol access level for a serial communications port.
NOTE: Valid selections are 0 - No Access, 1 - Login Required, 2 - Free Access
Default value is 1 - Login required.
SUBCODE
<No Subcode >
PRTA
PRTB
PRTC
EXAMPLES:
(RAL 0) - Disable remote serial protocol access level for all Ethernet ports.
(RAL?) - Get access level for Ethernet ports (RAL!0).
(RAL+PRTA 2) - Set remote serial protocol access level on port A (RS-232 In) to free access.
(RAL+PRTA?) - Get access level (RAL+PRTA!2).
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Input Power
SUBCLASS:
Preference
SUBCLASS:
Appendix D: Serial Command Reference
Down
ACCESS LEVEL:
DESCRIPTION OF USE
Set the pixel tracking for Slot x, Input y.
Set the pixel tracking for the main image.
Set the pixel tracking for the PIP image.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
Set the access level on Ethernet all ports.
Set the access level on port A (RS-232 In).
Set the access level on port B (RS-232 Out).
Set the access level on port C (RS-422).
Operator
Admin
D-53