Christie Entero RPMWU User Manual page 166

Appendix D: Serial Command Reference
(GMS) VDIC GROUPED-INPUTS MODE
CONTROL GROUP:
DESCRIPTION
Allows users to select a mode to group the last 3 BNC connectors (Input 4/5/6) on a Video Decoder Input Card.
valid options are:
0 = 3 CVBS sources
1 = 1 SVideo Source + 1 CVBS source
2 = 1 YPrPb (Component) source
SUBCODE
SLx0
EXAMPLES:
(GMS+SL10 0) - Use 3 BNC connectors for CVBS source.
(GMS+SL10 1) - Use 3 BNC connectors for 1 SVideo and 1 CVBS sources.
(GMS+SL10 2) - Use 3 BNC connectors for 1 YPbPr(component) source.
(GMS+SL10 ?) - Get the current mode setting.
(GNB) GREEN BLACK LEVEL
CONTROL GROUP:
DESCRIPTION
Green black level is used to compensate for relative variations in the black levels between Red, Green and Blue.
This is available on all cards expect the Video decoder. The correct setting achieves maximum contrast without
crushing white or black. When the drive and black level controls are set correctly for a signal, the Comprehensive
Color Adjustment, including color temperature, will work as expected. The drive and black level controls should
not be used to setup a specific color temperature as this will require separate color temperature adjustments to be
made for each signal.
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(GNB 128) - Set green black level to 128 on Main video.
(GNB+MAIN 128) - Set green black level to 128 on Main video.
(GNB+PIIP 100) - Set green black level to 100 on PIP video.
(GNB+IN32 100) - Set green black level to 100 on Slot 3, Input 2.
(GNB?) - Returns the current green black level value on Main video.
(GNB+PIIP ?) - Returns the current green black level value on PIP video.
(GNB+IN12 ?) - Returns the current green black level value on Slot 1, Input 2.
D-32
Option Power Up
SUBCLASS:
Input Power Up
SUBCLASS:
ACCESS LEVEL:
DESCRIPTION OF USE
Set a grouping mode for the last 3 BNC connectors on Video
Decoder card in the selected Slot.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the green black level on Slot x, Input y to the specified
value in the range of -255 to 255.
Set the green black level on the main video to the specified
value in the range -255 to 255.
Set the green black level on the PIP video to the specified
value in the range of -255 to 255.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
020-100367-05 Rev. 1 (6-2012)