Christie Mirage HD User Manual

Christie Mirage HD User Manual

3-chip projectors
Hide thumbs Also See for Mirage HD:
Table of Contents

Advertisement

• Environmentally Friendly Use Period
环保使用期限
• Material Concentration Values Table
有毒有害物质含量表
Part Name
Low voltage
power supply
(LVPS)
AC relay
Ballast
TIPM PCB
Built-in keypad
Three-chip panel
driver
High Definition
Panel Driver
Dual slot
backplane
module
Lamp Contact
PCB
Blower/Fan
Sensor
Illumination optics
system
Projection Lens
Auxiliary optics
Mechanical
enclosure*
Software CD
Lamp
Battery
Note:
O : indicates that the concentration value of the particular hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C, is below the stipulated levels in China SJ/T11363-2006.
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
China RoHS Compliance Information
关于中国《电子信息产品污染控制管理办法》的说明
The year number in the centre of the label indicates the Environmentally Friendly Use Period, which
is required to mark on the electronic information product sold in China according to the China RoHS
regulations.
本标志中表示的年数是根据《电子信息产品污染控制管理办法》(2006年2月28日)以及《电
子信息产品污染控制标识要求》(2006年11月6日)制定的、适用于在中华人民共和国境内销
售的电子信息产品的环保使用期限。
部件名称
(Pb)
X
低压电源
X
继电器
X
镇流器
X
TIPM电路板
X
控制键盘
X
三芯驱动板
X
高清晰度驱动板
X
双槽底板模块
X
灯连接板
O
吹风机/风扇
O
传感器
X
照明光学系统
X
投影镜头
X
辅助光学器件
X
机械附件
O
软件光盘
X
灯泡
O
电池
Material Concentration
有毒有害物质或元素
(
六价铬
(Hg)
(Cd)
(Cr 6+)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
X
O
O
X
O
O
O
O
O
O
O
O
X
O
O
O
O
)
多溴联苯
多溴二联苯醚
(PBB)
(PBDE)
O
X
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
i

Advertisement

Table of Contents
loading

Summary of Contents for Christie Mirage HD

  • Page 1 O : indicates that the concentration value of the particular hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C, is below the stipulated levels in China SJ/T11363-2006. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 2 EIP-A, EIP-B, EIP-C, may be above the stipulated levels in China SJ/T11363-2006. 表示该有毒有害物质至少在该部件的某一均质材料中的含量可能超出SJ/T11363-2006规定的限量要求。 * This part uses metallic alloys, which may contain Lead. 因该部件使用金属合金材料,故可能含有铅。 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 3: Table Of Contents

    Appendix F: Optional Input Modules................. F-1 Appendix G: Index ....................G-1 NOTE: Due to continuing research, all information in this manual is subject to change without notice. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 5: Introduction

    Status LED display on built-in keypad for easy projector status monitoring • Control with IR, wired or built-in keypad • Two input slots for Optional Input Modules Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 6: Components

    SXGA+ Optional Mirage HD8 Optional Matrix HD7 NOTE: Kc models include the same features, but are color corrected to film color standards. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 7: Purchase Record

    Registration If you encounter any problems with the projector and require assistance, contact your dealer or Christie Digital Systems. Fill out the information in the table below and keep with your records for future reference. Purchase Record...
  • Page 9: Installation & Setup

    NOTE: One of the available optional input modules can be installed at INPUT 5 or for additional connections. INPUT 6 Refer to 2.3 Connecting Sources for more details on connecting a specific source. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 10 Focus, Zoom etc. using the direct keys on the IR remote. You can also access the menu system and adjust these and other image settings by pressing on the remote. Menu Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 11: Installation Considerations

    The audience sitting within the viewing cone area will see a brighter image than those sitting just outside this area. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 12: Rear Screen Installations

    150 times the height of the letter. Small text located too far from the eye will likely be illegible at a distance no matter how sharply and clearly it is displayed. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 13 Appendix D. Due to lens manufacturing tolerances for lens focal length, actual throw distance can vary ±5% between lenses described as having the same throw ratio. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 14: Vertical And Horizontal Position

    NOTES: 1) Offsets are subject to 7% centering tolerance 2) % Offset = # pixels of offset / half panel resolution x 100. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 15 Section 2: Installation and Setup Figure 2.1. Vertical Offset Examples Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 16 Section 2: Installation and Setup Figure 2.2. Lens Vertical Offsets Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 17 Figure 2.3. Horizontal Offset Examples Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 18 Section 2: Installation and Setup Figure 2.4. Lens Horizontal Offsets 2-10 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 19: Adjusting Projector Height

    For more information, contact your dealer. Use only the CHRISTIE approved ceiling mount kit designed for your projector. Refer to the installation instructions and safety guidelines provided in the kit.
  • Page 20: Connecting Sources

    SYNC HOR/COMP SYNC labeled See Figure 2.7. VERT. 2-12 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 21 Image. 2) Do not connect digital component signals (known as YCbCr) to INPUT . Install an appropriate optional module in for this. INPUT 5 INPUT 6 Figure 2.8. Connecting YPbPr sources Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 2-13 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 22 PC250 Analog Input Module • Serial Digital Input Module • DVI Input Module (standard on Mirage HD models) • Dual SD/HD-SDI Module (standard on Christie HD models) NOTE: See Appendix F – Optional Input Modules for a brief description of each interface.
  • Page 23: Connecting Communications

    Connecting to the RS-422 port with incompatible equipment could damage your projector. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 2-15 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 24 Continue this pattern of connection with all projectors in the network. The last projector in the network will only have a connection to the RS232 IN connector. See Figure 2.12. 2-16 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 25 CAT5 cable to connect each projector’s Ethernet port to a hub belonging to the network. A controller or PC must also be connected to the hub. See Figure 2.14. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 2-17...
  • Page 26 The Default Gateway is an optional router device used to send and receive data outside the subnet. 2-18 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 27: System Integration - Gpio Connector

    AC outlet. Ensure the socket outlet is installed near the equipment and is easily accessible. The input voltage to the Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 2-19 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 28 Do not attempt operation if the AC supply and cord are not within the specified voltage and power range. Wait for the cooling fans to turn off before unplugging the projector. 2-20 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 29: Operation

    NOTE: The third foot, located at the rear of the projector (underside) is not adjustable. Refer to Section 2 - Projector Position and Mounting for instructions on how to adjust the projector’s feet. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 30: Projection Lenses

    The lamp door is located at the back of the projector, which provides easy access to the lamp module for replacement. See Section 4 for lamp replacement procedures. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 31: Using The Remote Or Built-In Keypad

    Closed shutter System warning or error has occured Cooling down (Rotating Horizontal Bars) Power to Off state or Powering up (segments spinning clockwise Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 32 *These are toggle keys, which require you to press and hold or press twice or press and use the up/down arrow keys. NOTE: To turn the OSD off you must press Figure 3.2. Remote Keypad Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 33 These parameters are listed in Table 3.1. An Auto Setup can save time in perfecting a display and you can modify the adjustments as desired. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 34 SD/HD-SDI Module inputs (A or B) was last used. Press again to display Input 5 from the other Dual SD/HD-SDI Module input. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 35 Menu Menu Press to enter or exit the projector’s menu system. Menu Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 36 Menu Preferences menu. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 37 Use the “Lens V” keys to position the image vertically while still keeping it rectangular. Press to return to presentation level. Exit Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 38: Navigating The Menus

    Press again to exit. In Help addition, a line of “hint” text is included at the bottom of some menus. 3-10 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 39 Control by using the proper key press or numerical sequence of key presses. Once selected, change the setting as desired (see below) and press to save and return to the current function menu. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-11 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 40 RS232 and RS422 Joined Broadcast Key RS232 and Ethernet Joined Backlight All Joined Front IR Back IR Wired Keypad Example of Pull-Down List 3-12 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 41 3) Press to cancel editing of numerical values. Exit Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-13 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 42: Using Inputs And Channels

    Shown at right is a sample channel list as would be available from . This is Channel typically called the channel list. 3-14 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 43 2) Channels created automatically do not appear in the channel list unless a parameter for the channel has been changed. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-15 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 44 Func channels. See Copying or Deleting a Channel below. 3-16 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 45 NOTE: For any deletion, a window will appear to confirm the deletion of the desired channel. Select “Cancel” (default) if you don’t want to delete after all. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-17 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 46 LOCKED: unchecked (default), all available image settings can be adjusted as desired. You cannot use Auto Setup with a locked channel. 3-18 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 47: Adjusting The Image

    Changes made in the Size and Position menu are applied immediately and are saved when you exit the menu (press Exit Menu Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-19 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 48 800 x 600, “No Resizing” in an SXGA+ projector will use the central 800 x 600 pixels and have a black border—the black border areas are unused areas. See below. 3-20 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 49: Vertical Stretch

    Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-21 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 50 Native Resolution 60Hz and pixels in the surrounding borders are turned off. You can also specify a specific active input 3-22 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 51 1080p 24Hz / 1080i 30Hz according to the chosen Plug & Play <EDID> format. EDID = Extended Display Identification Data standard. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-23 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 52 Conversely, if the image is washed out and unnatural, with excessive detail in black areas, increase the 3-24 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 53: Noise Reduction

    Select with a standard definition televised signal (SDTV). YPbPr (Video) • Select with a high definition televised signal (HDTV). YPbPr (HDTV) Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-25 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 54 Most of Europe, China, Australia, some of S. America, some of Africa PAL-M Brazil PAL-NC Argentina, Chile, other Latin American countries PAL 60 SECAM France, Eastern Europe, most of Africa 3-26 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 55 3) There must be at least two consecutive white pixels present in the image for proper “Auto Input Level” function. Leave this control off after use. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-27 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 56 2. Check the color temperature setup using an internal grayscale test pattern, making sure to obtain a neutral grayscale. NOTE: Not required for “Auto” adjustment. 3-28 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 57 See Figure 3.7. Adjusting Input Levels Using the Peak Detector: Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-29 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 58 Upon exiting the Input Levels menu, the Peak Detector checkbox will clear. Figure 3.7. Adjusting Input Levels Using the Peak Detector (RED EXAMPLE SHOWN) 3-30 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 59 (standard or high-definition). Alternatively, you can specify a color temperature. This enables the adjacent Color Temperature slide bar and applies Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-31 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 60 Performance of aperture depends on the lens in use. NOTE: Optical Aperture also appears in the lamp menu. - No function. RESERVED 3-32 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 61 GPIO port and a server. Keep this adjustment OFF (default) when you are not using the Mirage 3D Stereo Sync Cable. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-33 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 62 Free Run forces the output to run at a 60Hz frame rate. Locked Rate Matched Free Run NOTE: 1) See separate Using 3D in Mirage manual provided for additional information. 3-34 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 63: D Sync Input

    GPIO port and a server. Only the last projector in the chain that is connected to the emitter will choose one of the emitter choices; all Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-35...
  • Page 64 3D sources (default setting is checked). Once set, this value will be maintained for that source for all future uses. This option is also available under the Advanced Image Settings menu. 3-36 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 65 Free Run forces the output to run at a 60Hz frame rate. No function. RESERVED — Requires optional ChristieTWIST module. See ChristieTWIST WARP LATENCY — User’s Manual provided with the module. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-37 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 66 Select the setting that produces the best image. 3-38 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 67: Adjusting System Parameters And Advanced Controls

    LARGE MENU FONT — checkmark to enlarge menus and their text. You may have to adjust “Menu Location” to accommodate the increased menu area. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-39 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 68 Start-up And No Signal – A splash screen appears at start-up only if there is no source signal. To replace the default “Christie logo” splash screen (or other) with one of your own, use KoRE Librarian to download the desired .bmp to the projector. This will overwrite the current splash screen content in projector memory.
  • Page 69 In Figure 3.8A, RS422 controls only the projector to which it is connected. In Figure 3.8B, either RS232 or RS422 will control the network. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-41 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 70 DHCP server or other user. It takes approximately 10 seconds for the projector to respond at its new address. 3-42 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 71 The projector processes requests that come on either 10 or 64 consecutive channels beginning with the ‘base channel’ defined here. The requests implement the following functions: Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-43 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 72: Broadcast Key

    To disable both IR sensors, you cannot use the IR remote keypad to select the second setting. This safeguard prevents accidentally disabling an IR keypad while you 3-44 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 73 “Uniformity Enable” checkbox is enabled and you are using a “User” color temperature defined by the Brightness Uniformity controls. To disable the Brightness Uniformity function, delete the “Uniformity Enable” checkmark. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-45 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 74 Section 3: Operation NOTES: 1) See also 3.10, Using Multiple Projectors for the complete step-by-step procedure for achieving uniform brightness in adjacent displays. 2) If Christie TWIST module is installed, the enable checkbox changes to a list giving the option to choose from several different uniformity maps.
  • Page 75 Apply at any time in the Advanced Image Settings menu. Figure 3.11. CIE 1931 Chromaticity Diagram (without Yellow Notch Filter) Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-47 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 76 Blinders are recommended for fixed installations. Default Color Adjustments — SUBMENU Refer to System Configuration – Geometry and Color, Color Adjustments by X,Y for description. 3-48 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 77: Freeze Image

    Colors can also be enabled/disabled by entering the corresponding function code listed on the back of the standard remote keypad. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-49 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 78: Peak Detector

    When used with a 16-step grayscale pattern in which the two black and white bands 3-50 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 79: Level Detector

    A full calibration performs both a reference and motion calibration. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-51 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 80: System Configuration

    Select the format and which of the two channels is the primary input. 3-52 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 81: Working With Pip And Seamless Switching

    PIP. Options PIP Border Width PIP Border Color Image Optimization Switching Options Fade Time (n/a) Numbers Select Main Image PIP Only Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-53 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 82 See 3.6, Adjusting the Image for details PIP Border Width Set the desired line thickness for your PIP window border. 3-54 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 83: Image Optimization

    NOTE: PIP must be disabled for Fade Time to take effect. Also, the PIP window must be closed to activate it. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-55 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 84: Working With The Lamp

    NOTES: 1) If you change modes over the life of a lamp, the lamp limit you originally expected may no longer be possible. 2) Turning the lamp on and off reduces lamp life 3-56 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 85 “ ” mode this value remains at the original “ ” Intensity Intensity setting chosen and cannot be adjusted. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-57 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 86 Lamp History automatically updates whenever you record a new lamp serial number—the new lamp is added to the bottom of the list. 3-58 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 87 The “Lamp Limit” setting should not exceed the expected lamp life, as an old lamp becomes increasingly fragile and more prone to sudden failure. See also 4.4, Lamp and Filter Replacement. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-59 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 88: Status Menu

    To return to the factory-set color primaries, such as when a projector is moved to different site, you must access the Service menu (password-protected). Select the 3-60 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 89: Color Adjustment Procedure

    5. In each projector, select a “User” color adjustment (1-4) to enable Color Adjustments by X,Y changes. Then enter your recorded x/y values into each menu (Figure 3.15). Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-61 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 90 7. All screens should now be color-matched. Apply this new “User” gamut to a source at any time by selecting it in the “Select Color Adjustment” list accessed in the Advanced Image Settings menu. 3-62 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 91 Light output and Brightness Uniformity can vary RUN LAMP FOR 100 HOURS— significantly during the first 100 hours of lamp use. For best results with new Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-63 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 92 Brightness Uniformity adjustments focus on extreme EDGES as indicated in the illustration at right. In either Color Adjustments menu, select a “User” color. Then: 3-64 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 93 (i.e., change their light output) until all portions of the left side closely match the center color temperature. Adjust an edge first (focusing on its center), and then adjust its corners. See Figure 3.17. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-65 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 94 Zones Return to Steps & and, if necessary, fine-tune the zones so that they all still exhibit a single color temperature. 3-66 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 95: Main Functions

    “Uniformity Enable” checkbox at the top of the Brightness Uniformity menu. Edge Blending Christie Edge Blending is an innovative set of software functions that can quickly and easily blend white levels along the edges of multiple adjacent projected images to create a single seamless larger image.
  • Page 96 Such functions duplicate those provided elsewhere in the menu system. 3-68 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 97: Edge Blending Procedure

    Use the following as a guide (examples show overlapping width only—values for overlapping height will differ): Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-69 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 98 (may be only necessary for blending a 2 x 2 projector display because of blending differs for the sides and center). 3-70 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 99: Remote Control Of The Projector

    RS422 port (recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector address. Valid ASCII codes and messages are documented in the Christie Serial Communications document available at the Christie website. Connect your PC to the projector’s Ethernet port. In your web VIA WEB INTERFACE —...
  • Page 100 Exit Exit the need for service by a qualified service technician. 3-72 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 101 For example, the code “27” means the lamp could not be turned on. Error codes for this projector are listed in Table 3.5 below. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-73 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 102 Downloaded code will not fit Scaler communication problem BUILT-IN KEYPAD Unable to access EEPROM on the built-in keypad EEPROM memory re-initialization on the built-in keypad 3-74 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 103 (cooling if necessary). For detailed information, monitor the RS232 IN port. Contact dealer/factory if error persists. Codes omitted from this table should not appear in your projector. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 3-75 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 105: Maintenance

    Read all operating instructions prior to using the projector. Projector Location Operate the projector in an environment, which meets the operating range specified in Section 6 – Specifications. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 106 Sudden stops, excessive force and uneven surfaces may cause the projector and cart combination to overturn. • Only use Christie-approved ceiling mount fixture, if the projector is to be ceiling mounted. Lamp Lamp: The projector uses a Cermax® Xenon lamp to deliver its high brightness. A lamp should be replaced when it has reached its end of life or if a noticeable change in brightness occurs.
  • Page 107 Use of any other part other than the ones specified by the manufacturer can result in fire, electric shock or risk of personal injury and irreparable equipment damage. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 108: Cleaning And Maintenance Guide

    WARNING Proper face shield and protective gloves are required if the lamp module is removed from the projector. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 109: Replacing Remote Batteries

    (below the input panel) and can be accessed by removing the Replacement lamp access panel. Use only the Christie approved Lamp and Filter Kit for your specific projector model. See Table 4.2 below. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual...
  • Page 110: Turn The Lamp Off

    A qualified service technician must perform lamp replacement. Cool the lamp completely and handle by the housing only. Install the correct wattage lamp supplied by Christie (see above) and read the Lamp Replacement procedure in its entirety before proceeding. Do not touch the glass surface of the lamp. Fingerprints left on the surface can lead to an intense accumulation of heat called a “hotspot”, which could...
  • Page 111 Firmly grasp the lamp by its housing only and pull it straight out (lamp slides along guides) until it is free. See Figure 4.4. Discard the lamp using safe disposal/recycling practices. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 112 In this case, partially remove the lamp and try pushing it back in again. Then, try switching the lock lever to the “lock” position. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 113 IMPORTANT: If you neglect to enter a serial number, the lamp timer will not reset to “0” and will therefore be inaccurate. The lamp life limit may then expire prematurely. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 114 If you are working in an extremely dusty environment you may want to replace the filters sooner. Use the filters provided in the Christie approved Lamp and Filter Kit for your specific projector model. 1. TURN OFF THE PROJECTOR, COOL and UNPLUG Before removing or installing a filter, turn off the projector and allow it to cool for five minutes before unplugging.
  • Page 115: Replacing The Projection Lens

    Figure 4.8. Lens Assembly STEP 2 Install the lens cap and press the lens release button See Figure 4.9. Figure 4.9. Depressing Lens Release Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 4-11 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 116 Appendix D, Throw Distance. In a permanent installation, always use the appropriate throw distance formula to calculate the best position for the projector. 4-12 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 117: Troubleshooting

    2. The source may be double terminated. Ensure the source is terminated only once. 3. The source (if non-video) may need a different sync tip clamp location. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 118 1. Check leveling of the projector. Ensure the lens surface and screen are as parallel to each other as possible. 2. Is the vertical offset correct? Adjust as necessary using the vertical offset knob. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 119: Lamp

    If you still have trouble establishing communications with a projector added to an existing Ethernet network, the projector’s IP address is likely in conflict with another address already in use. Contact your network administrator. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 120: Sync Input

    1. Sync is present, but out of range. CAUSE / REMEDY: 2. Previous hook up to projector was sending Sync to Emitter. Change 3D Sync Output to Next. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 121: 6.1 Specifications

    5500 6300 7150 Christie HD8K 7000 7800 8800 Christie HD7Kc 5580 6200 7000 Mirage HD8 7000 7800 8800 Matrix HD7 5580 6200 7000 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 122: Color Temperature

    NOTES: 1) 0% offset is equal to half the image above and below lens center OR half the image to the left or right of lens ± center. 2) Offsets are subject to a 7% centering tolerance. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 123 630 mV nominal (burst) ±2 V DC Offset Nominal Impedance 75 ohms Return Loss (VSWR) 20 dB min (1.2:1 max.) @ 6 MHz Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 124: Remote Control

    3.5mm RCA jack Input levels High: 2.2 V – 5.6 V (or open) Low: -0.6 V – 0.9 V @ 1 mA Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 125 800 – 1200W Lamp Life (typ.) 500W models 2500 hrs @ 500W 1000W models 1500 hrs 1200W models 1500 hrs Call for warranty information Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 126 Ethernet, RS-232 and RS-422 communication cables Two-way remote controller KoRE Librarian for downloading new software Remote IR sensor Ceiling Mount Ceiling Mount Extension Stacking Frame Service Manual Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 127: Optional Input Modules

    RGB400 Buffered Amplifier Input Module PC250 Analog Input Module Serial Digital Input Module DVI Input Module (Standard with Mirage HD series) Dual SD/HD-SDI Module (Standard with the Christie HD series) Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 129: Appendix A: Glossary

    A collection of measurements stored by the projector for a given input source, including frequencies, pulse width, polarity, syncs, channel number and location, user- Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 130 , this device converts NTSC 3.58, NTSC 4.4, PAL, INPUT 3 INPUT 4 PAL-N, PAL-M, or SECAM to RGB video. Detail The sharpness of a display from a video source. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 131 A hot spot appears along the line of sight and “moves” with the line of sight. High gain screens and rear screens designed for slide or movie projection usually have a hot spot. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 132 The Line of Best Viewing is along the line of reflection. LiteLOC A Christie software feature where samples of output light from a projector trigger ™ automatic adjustments in the lamp ballast power in order to maintain a constant light output over time.
  • Page 133 The minimum time required for a CRT projector to move the position of the scanning (Horizontal) spot from the right edge to the left edge. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 134 The duration of each sync pulse generated by a computer. The sync width is part of the blanking time. TTL Video A type of RGB video with digital characteristics. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 135 (usually 75Σ for video). Throw Distance The distance between the front feet of the projector and the screen. Also called “Projector-to-Screen Distance”. Always use the correct Christie throw distance formula to calculate the proper throw distance (±5%) required for your lens. Throw Ratio Throw ratio = throw distance / screen width.
  • Page 137: Appendix B: Keypad Reference

    IR remote to a wired remote, if desired. Refer to Section 3 for a specific description of each key and how to use them correctly. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 138 * Toggle keys, which require you to either, press and hold, or press twice or press and use the up/down arrow key. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 139: Serial Communication

    RS232 serial cable to the port. Or, for long-distance RS232 IN (>100 ft.) links with an RS422-compatible PC or controller, connect RS422 cable to port. RS422 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 141: Throw Distance

    NOTES: Calculations are not shown for 1.2:1 lenses. TD = projector distance from the screen to the center of the projector’s front feet W = screen (image) width. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 142: Appendix D: Throw Distance

    Appendix D: Throw Distance SXGA+ Lenses Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 143 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 144 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 145 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 146 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 147 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 148 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 149 Appendix D: Throw Distance Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 150 Appendix D: Throw Distance D-10 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 151 177.8 61.0 155.0 75.5 191.9 using the correct unit of measurement when 76.8 195.0 66.9 170.0 82.6 209.8 calculating throw distance. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-11 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 152 1035.0 470.3 1194.6 474.3 1204.7 413.4 1050.0 477.1 1211.8 481.1 1221.9 419.3 1065.0 483.8 1229.0 487.8 1239.1 425.2 1080.0 490.6 1246.2 D-12 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 153 1260.0 571.8 1452.3 575.9 1462.9 502.0 1275.0 578.5 1469.4 582.7 1480.1 507.9 1290.0 585.3 1486.6 588.1 1493.8 512.6 1302.0 590.7 1500.3 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-13 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 154 1055 576.2 1463.6 483.3 1227.7 421.3 1070 584.4 1484.4 490.1 1244.9 427.2 1085 592.6 1505.1 496.9 1262.1 433.1 1100 600.7 1525.8 D-14 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 155 1535 837.6 2127.5 700.2 1778.4 610.2 1550 845.7 2148.2 706.9 1795.6 616.1 1565 853.9 2168.9 710.1 1803.6 618.9 1572 857.7 2178.6 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-15 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 156 990.0 735.8 1868.8 454.0 1153.1 395.7 1005.0 746.9 1897.1 460.7 1170.3 401.6 1020.0 758.0 1925.3 467.5 1187.5 407.5 1035.0 769.1 1953.6 D-16 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 157 1230.0 913.8 2321.0 562.4 1428.4 490.2 1245.0 924.9 2349.2 569.2 1445.7 496.1 1260.0 936.0 2377.5 575.9 1462.9 502.0 1275.0 947.1 2405.8 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-17 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 158 387.8 731.7 1858.5 451.7 1147.3 393.7 1000 742.9 1887.0 458.5 1164.6 399.6 1015 754.1 1915.4 465.3 1181.8 405.5 1030 765.3 1943.9 D-18 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 159 1225 910.9 2313.8 560.1 1422.7 488.2 1240 922.1 2342.2 566.9 1439.9 494.1 1255 933.3 2370.7 574.1 1458.3 500.4 1271 945.3 2401.1 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-19 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 160 2276.1 404.3 1026.9 352.4 911.4 2315.1 411.1 1044.1 358.3 926.8 2354.0 417.8 1061.3 364.2 942.1 2393.0 419.2 1064.7 365.4 945.2 2400.8 D-20 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 161 1110 1085.9 2758.3 508.2 1290.8 442.9 1125 1100.5 2795.2 515.0 1308.0 448.8 1140 1115.0 2832.0 521.7 1325.2 454.7 1155 1129.5 2868.9 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-21 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 162 1770 1724.9 4381.2 806.3 2048.0 702.8 1785 1739.4 4418.1 813.1 2065.2 708.7 1800 1753.9 4455.0 821.2 2085.9 715.7 1818 1771.4 4499.2 D-22 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 163 387.8 1603.7 4073.3 451.7 1147.3 393.7 1000 1627.9 4135.0 458.5 1164.6 399.6 1015 1652.2 4196.6 465.3 1181.8 405.5 1030 1676.5 4258.3 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-23 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 164 1045 1700.8 4320.0 478.8 1216.2 417.3 1060 1725.1 4381.7 485.6 1233.4 423.2 1075 1749.4 4443.4 491.9 1249.5 428.7 1089 1772.0 4500.9 D-24 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 165 1055 1705.7 4332.5 483.3 1227.7 421.3 1070 1729.8 4393.7 490.1 1244.9 427.2 1085 1753.9 4454.9 496.9 1262.1 433.1 1100 1778.0 4516.1 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-25 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 166 1910 3079.4 7821.7 869.5 2208.6 757.9 1925 3103.5 7883.0 876.3 2225.8 763.8 1940 3127.6 7944.2 882.6 2241.9 769.3 1954 3150.1 8001.3 D-26 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 167 6466.5 429.1 1090.0 374.0 2586.5 6569.8 435.9 1107.2 379.9 2627.2 6673.1 442.7 1124.4 385.8 2667.9 6776.4 449.5 1141.6 391.7 2708.6 6879.7 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual D-27 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 168 1115 3033.9 7706.2 510.4 1296.5 444.9 1130 3074.6 7809.5 517.2 1313.7 450.8 1145 3115.3 7912.8 523.1 1328.6 455.9 1158 3150.5 8002.3 D-28 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 169: System Integration

    2 of its input goes high.) (GIO C2 O) Set pin #2 configuration to output (GIO 2 H) Set pin #2 to high (state) Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 170: Appendix E: System Integration

    Power on when pin #2 set to high (RTE G 2 L “(PWR 0)”) Power off when pin #2 set to low Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 171: Appendix F: Optional Input Modules

    Accepts YPbPr, composite (on green) and Y/C (on red/blue) • BNC connectors for RGB signal inputs • Buffered signals to a remote destination NOTE: The audio connectors are not functional. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 172 DVI Input Module This module can display digital video input signals conforming to the DVI (Digital 38-804635-xx Visual Interface) single-channel standard. Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 173 Provides input(s) to output(s) loop-through capability • Supplies interchangeable inputs as part of the Picture-in Picture display • SMPTE 259M and 372 compatible Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 175 Remote Control of Projector, 3-68 Cables Submenu, 3-38 Serial Communication, C-1 Component Video, 2-13 Ceiling Mount, 2-11 Composite Video Channel Connection, 2-14 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 176 IR Sensors, 3-42 Full Height, 3-21 Full Screen, 3-21 Full Width, 3-21 Keypad, 2-15, B-1 Function Key, 3-8 Built-in, 3-3 Enabling Wire Remote, 3-42 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 177 Powerup, Auto, 3-37 Configuration, 3-36 Primary Colors, Adjusting, 3-57 Image Settings, 3-25 Projector Lamp, 3-53 Assigning/Changing Number, 3-38 Main, 3-10 Error Conditions, 3-69 Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...
  • Page 178 Video Standards, 3-27 Slidebars "Direct", 3-12, 3-19 Using, 3-12 YPbPr, 3-26 Source Setup. See Channel Connection, 2-13 Splash Screen Setup. See Menu:Splash Screen Setup Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual 020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher...

Table of Contents