Virtual Osd Menu - Christie Entero RPMWU User Manual

The following table describes each area found in the Tools window. See
Virtual OSD tab presents the
A
Main Menu (refer to Appendix
A, Menu Tree for more details).
OSD section contains an On and
D
Off button. Only one is enabled
depending on the current state of
the OSD. Control of the OSD is
always available through the
remote.

Virtual OSD Menu

Selecting an option from a menu displays its associated
window, showing related information and input fields. To
return to the previous menu, click the menu title bar (see
Figure B-7).
To return to a previous menu, click on the current menu's title
bar or press ESC. NOTE: Click the Maximize button to view
the full screen size.
Various types of menu elements
allow you to define projector settings.
These include:
• Field entries
• Drop-down lists
• Check boxes
• Sliders
IMPORTANT: When a menu option is modified through the Virtual OSD menu, the projector setting takes
effect immediately.
Entering a number in a numeric field
1. Position your mouse pointer within the numeric field that you wish to edit.
2. Click to highlight the field entry. NOTE: If you click the menu option, the field cannot be edited.
3. Edit the field entry.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(06-2012)
The Maximize/Minimize button
B
toggles depending on the current
state of the projector. When
maximized, the Virtual OSD
displays over the entire page so
that subsequent menus can be
viewed without scrolling. No
access to tabs when maximized.
Auto Setup button uses the
E
manufacture's default settings
(refer to Section 3, Operation for
more details).
(Figure B-8 and Figure
Figure B-6.
Help button presents a pop-up
C
window which provides
information to help you navigate
within the current menu.
B-9)
Figure B-7 View Previous Menu
Appendix B: Web UI
B-5