Christie Entero RPMWU User Manual page 148

Appendix D: Serial Command Reference
(BOG) BLUE ODD PIXEL GAIN
CONTROL GROUP:
DESCRIPTION
This adds an offset to Input blue gain settings on the analog Input card. It is used to compensate for differences
between the A to D converter used to sample even pixels, and the one used for odd pixels. A value of 0 is the null
position in which both A to D converters are set to exactly the same value.
SUBCODE
SLx0
EXAMPLES:
(BOG+SL10 -10) - Set a blue gain offset to -10 on Slot 1.
(BOO) BLUE ODD PIXEL OFFSET
CONTROL GROUP:
DESCRIPTION
This adds an offset to Input blue black level settings on the analog Input card. It is used to compensate for
differences between the A to D converter used to sample even pixels, and the one used for odd pixels. A value of
0 is the null position in which both A to D converters are set to exactly the same value.
SUBCODE
SLx0
EXAMPLES:
(BOO+SL10 -10) - Set a blue black level offset to -10 on Slot 1.
(BRT) BRIGHTNESS
CONTROL GROUP:
DESCRIPTION
The Brightness control adjusts the offset applied to the Input signal. It has exactly the same effect as adjusting the
Input levels, except that it operates an all 3 colors and can be used to make quick adjustments. For precise control,
the Input level adjustments should be used. If the setting is too high, black portions of the image are displayed as
dark grey, making the image appear washed-out. If the setting is too low, dark greys are displayed as deep black
and detail is lost in the darkest parts of the image. This condition is known as 'crushing'. When adjusting, start
from a lower setting and adjust upwards until just above the point where black is crushed.
SUBCODE
INxy
D-14
Option Power Up
SUBCLASS:
Option Power Up
SUBCLASS:
Input Power Down
SUBCLASS:
ACCESS LEVEL:
DESCRIPTION OF USE
Set a blue gain offset for the second A to D.
ACCESS LEVEL:
DESCRIPTION OF USE
Set a blue black level offset for the second A to D.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the brightness on Slot x, Input y to the specified value in
the range of -1000 to 1000.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
Operator
020-100367-05 Rev. 1 (6-2012)