Christie Entero RPMWU User Manual page 53

Display Automatic Message Boxes
Check to enable message boxes that are not directly triggered by user actions, for example signal information
message boxes.
Display User Message Boxes
Check to enable message boxes that are directly triggered by user actions, for example gamma or lens control
message boxes.
Display Error Messages
Choose how you want to be notified of errors detected in either the incoming signal or projector. Select Screen
or All (default) to see brief on-screen messages. This is recommended during setup or testing of the projector.
Or, select "Serial Ports" to receive messages via RS-232 or RS-422 serial communication only. To hide error
message displays, such as during shows and presentations, select Off or Serial Ports.
Splash Screen Setup
Choose when to display an introductory splash screen image, such as a company logo, graphic or message.
• Always Off – A splash screen never appears
• Start-up Only – The splash screen logo appears at projector start-up only.
• Start-up And No Signal – A splash screen appears at start-up and at any time when there is no signal.
To add your own splash screen in addition to the default "CHRISTIE logo" splash screen, use the Web UI to
download the desired bitmap (.bmp) file to the projector. This will overwrite any other user splash screen that
has been downloaded.
NOTE: Only one user splash screen can be saved in the projector.
OSD Transparency
Check this box if you want the OSD menu backgrounds to be transparent.
Menu Type
Menu type is preset to Advanced which provides access to all projector functions.
Splash Screen
Choose which splash screen is to be used; the default or user downloaded splash screen.
Cascading Menus
Enable or disable cascading menus. When disabled, a single menu level is displayed on the OSD at a time.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)
Section 3: Operation
3-33