Reset Ils File Settings; Add A Lens Serial Number; Enable Automatic Ils On A Lens; Reset The Lens Position On Projector Startup - Christie CP42LH User Manual

Reset ILS file settings

You must reset the Intelligent Lens System (ILS) when you move the lens, you have manually
adjusted horizontal or vertical offset, focus, or zoom, or when a power outage occurs during a
channel change.
1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. Tap Quick Reset.
4. Tap Yes.

Add a lens serial number

1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. In the Serial Number field, tap Launch Dialog
4. Type the serial number for the lens.
5. Tap Enter.
6. Tap Save.

Enable automatic ILS on a lens

Use this procedure to move the lens to a position specified by the channel settings.
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Select Enable Automatic ILS in the Intelligent Lens System area.

Reset the lens position on projector startup

1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. In the Intelligent Lens System area, select Reset on Startup.

Complete a full lens calibration

1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. In the Intelligent Lens System area, tap Full Calibration.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Manage Projector Setting Files
.
43