Christie Entero RPMWU User Manual page 189

(RDB) RED BLACK LEVEL (Cont'd)
MAIN
PIIP
EXAMPLES:
(RDB 128) - Set red black level to 128 on main video.
(RDB+MAIN 128) - Set red black level to 128 on main video.
(RDB+PIIP 100) - Set red black level to 100 on PIP video.
(RDB+IN32 100) - Set red black level to 100 on Slot 3, Input 2.
(RDB?) - Returns the current red black level value on main video.
(RDB+PIIP ?) - Returns the current red black level value on PIP video.
(RDB+IN12 ?) - Returns the current red black level value on Slot 1, Input 2.
(RDD) RED DRIVE
CONTROL GROUP:
DESCRIPTION
The red drive level is used to compensate for different amounts of attenuation between the Red, Green and Blue in
the signal. Available on all cards expect the Video decoder.
The correct setting achieves maximum contrast without crushing white or black. When the drive and black level
controls are set correctly for a signal, the Comprehensive Color Adjustment, including color temperature, will
work as expected. The drive and black level controls should not be used to setup a specific color temperature as
this will require separate color temperature adjustments to be made for each source.
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(RDD 128) - Set red drive to 128 on main video.
(RDD+MAIN 128) - Set red drive to 128 on main video.
(RDD+PIIP 100) - Set red drive to 100 on PIP video.
(RDD+IN32 100) - Set red drive to 100 on Slot 3, Input 2.
(RDD?) - Returns the current red drive value on main video.
(RDD+PIIP ?) - Returns the current red drive value on PIP video.
(RDD+IN12 ?) - Returns the current red drive value on Slot 1, Input 2.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Input Power
SUBCLASS:
Appendix D: Serial Command Reference
Set the red black level on the main video to the specified value
in the range -255 to 255.
Set the red black level on the PIP video to the specified value
in the range of -255 to 255.
Down
ACCESS LEVEL:
DESCRIPTION OF USE
Set the red drive on Slot x, Input y to the specified value in the
range of -255 to 255.
Set the red drive on the main video to the specified value in the
range -255 to 255.
Set the red drive on the PIP video to the specified value in the
range of -255 to 255.
Operator
D-55