Christie Entero RPMWU User Manual page 74

Section 3: Operation
• EM Network: All Ethernet messages related to ArrayLOC flow through the EM Network port of the
PHM.
• PHM Network: All Ethernet messages related to ArrayLOC flow through the PHM Network port of the
PHM.
Synchronize Keys, Test Pattern, Color Enable
Use the Synchronized option to set the projector to listen for remote keystrokes through the ArrayLOC
network and the master projector. All synchronized projectors respond to the same keystrokes. Double key
strokes may not register correctly, use alternate key commands instead.
A synchronized projector automatically starts listening to its IR receiver if the master projector becomes
unavailable, for example if it goes into standby mode.
You can override the key synchronization by using the Proj key and projector address to communicate with
a specific projector, or you can use a wired remote with a specific projector.
Independent indicates that the projector listens to its own IR remote receiver. It is the default option.
Change this setting for each projector individually.
NOTE: ArrayLOC network communication overrides RS-232 serial communication for keys.
3-54 Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)