Auto Input Searching; Hdmi Output Loop Source; Standby Active Loop-Through - Christie Entero RPMWU User Manual

Section 3: Operation

Auto Input Searching

When enabled, the system will continually search for the next valid signal when no signal is present or when
loss of sync occurs on the current user selected input. In the case of multiple signals to choose from, the order
is based on slot, followed by inputs on that slot.

HDMI Output Loop Source

This control is used to configure the HDMI output options. Selecting Direct Loop will directly pass-through
the HDMI Input signals: on the same Twin HDMI Input Card, the Input1 signal is looped to Output1 and the
Input2 signal is looped to Output2. Selecting Main/Secondary Loop will loop the Main & PIP video to the
outputs, regardless from which card these signals originate. The Main video signal is looped to Output1, and
the PIP video signal is looped to Output2. Selecting Disable will shut OFF the HDMI outputs completely.

Standby Active Loop-Through

Select the check box to allow an incoming signal to be passed to the Output ports of the HDMI Input module
when the unit is in STANDBY mode.
3-62 Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1 (06-2012)