Arrayloc Troubleshooting Tree Continued - Array Color Setup; Entero Rpmwu/Rpmsp/Rpmhd-Led01 User Manual - Christie Entero RPMWU User Manual

6.6.8 ArrayLOC Troubleshooting Tree Continued - Array Color Setup

Troubleshooting ArrayLOC -
START HERE
Go to the Main > Configuration (4) > ArrayLOC (13) >
Bright/ColorLOC Configuration (3) menu.
Select the Array Status menu item to display the
Bright/ColorLOC Array Status.
Do the colors and brightness of
the array projectors match?
Yes
Is the array brightness the
expected brightness?
Yes
Are the array colors (red, green,
blue, white) the expected colors?

Entero RPMWU/RPMSP/RPMHD-LED01 User Manual

020-100367-05 Rev.1 (06-2012)
A3 B4 C7 C8 C9
B1 C3 C12
Menu
Reference
A11
A7
A1
No
B1
No
A8
C1
No
C1
Proceed to Take
Control of the Array/
Set the Array Color
No Target Gamut
Target (Managing
Colors with ArrayLOC
in Section 3)
Bright/ColorLOC Array Status
4
< Target
Flags ProjID Group Int
W 1
r wW* 0
W 2
gbW 3
Menu > Configuration > ArrayLOC > Projector Color Adjustment
Menu > Configuration > ArrayLOC > Array Color Target
Menu > Configuration > ArrayLOC > ArrayLOC Configuration
B2 A12
Menu > Configuration > ArrayLOC > Bright/ColorLOC Configuration
Menu > Configuration > Service
C11
Is the problem projector
Yes Color Saturation > Select Color Adjustment
set to Max Drives?
No
C10 Yes
Is the problem projector
C5
Advanced Color Adjustment > Color Mode
set to Native?
the problem projector resolve
No
C9 No
Does clearing the very large
PCA adjustments resolve the Yes
problem?
Yes
4 C12
C8 Yes
Do the mismatched projectors
Does any projector have very
change brightness when another
No large PCA adjustments to their
projector takes control of the array and
primary colors?
changes the RGB Brightness Target?
A4
No
C7
C2
Note!
Are there any projectors
For "Maximum"-type
with very different color
Yes
Target Gamuts the Common
capabilities than the others?
Gamut should be close to the
listed projector capabilities
rather than the Target Gamut.
C2 No
Is the Is the Common Gamut
Yes reasonably close to the Yes
correct? Target Gamut?
Target Gamut 800 330 160 800 125 000 313 329 1000
Common Gamut 687 306 193 738 150 34 313 329
Age Rx Ry RY Gx Gy GY Bx By BY Wx Wy
211 1 1 692 304 283.2 185 748 696.8 139 28 67.2 313 329 369.1
211 1 1 687 306 109.9 193 741 123.4 145 23 17.9 313 329 361.2
211 1 1 699 296 416.5 188 745 778.5 141 29 91.7 313 329 418.0
211 1 1 700 295 343.7 181 749 700.9 149 23 57.3 313 329 390.5
A5 Menu > Status
C11
Menu > Configuration > Service > Color Saturation
C10
Menu > Configuration > Service > Advanced Color Adjustment
A13 A14 C4
Menu > Configuration > Service > ArrayLOC Service
Done
C6 Recalibrate the internal
sensor of the problem
projectors
Does cycling AC power to the
Yes No
array resolve the problem?
OR
Call Tech Support
Yes No
Does cycling AC power to
the problem?
Proceed to Fine
Tuning of Projected
Colors (Managing
Colors with ArrayLOC
A14 No in Section 3)
C4
Is the Adjustment
Interval set to an Yes
appropriate value?
No No Yes
C3
Menu
> Configuration
Do the mismatched projectors
> ArrayLOC
change color when another projector
> Array Color
takes control of the array and
Target
changes the Array Color Target?
350
WY
Section 6: Troubleshooting Tree
6-11