Christie Entero RPMWU User Manual page 198

Appendix D: Serial Command Reference
(SST) SYSTEM STATUS (Cont'd)
COOL
HLTH
LAMP
SIGN
SYST
TEMP
VERS
EXAMPLES:
(SST+ALRM?) returns (SST+ALRM!000 002 "101" "Prism temperature")
where parameters are P1=index number, P2=error level, P3=value, P4=description.
Error level is 0=no errors or warnings, 1=warning, 2=error, 3=error and warning.
(STD) VIDEO STANDARD
CONTROL GROUP:
DESCRIPTION
This control displays or sets the current video standard that is decoding the Input signal.
You can allow the projector to automatically determine the standard or you can specify a specific standard from
the selection list.
0 = Auto. Automatically determined by decoder.
1 = PAL is a commonly used format in much of Europe, China, Australia, and some South American and African
countries.
2 = NTSC is a commonly used format in North America, and Japan.
3 = SECAM is a format found primarily in France, Eastern Europe and much of Africa.
4 = NTSC44 is a tape-only standard and is usually used with hybrid signals used to provide compatibility with
video material of another TV format without a complete translation.
5 = PAL-M is a format found primarily in Brazil.
6 = PAL-NC is a format found primarily in Argentina and Chile, and some other Latin American countries.
7 = PAL-60
Only those standards that have similar horizontal and vertical frequencies to the current Input source are enabled.
SUBCODE
INxy
MAIN
D-64
Input Power Up
SUBCLASS:
Returns cooling data - cooling fans, air flow, etc.
Returns system health.
Returns LAMP operational data.
Returns signal data - freq, etc.
Returns system data - power, hours of use, shutter open, etc.
Returns temperature data.
Returns version numbers.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the video standard on Slot Input y to the specified value in
the range of known video standards.
Set the video standard on the main video to the specified value
in the range of known video standards.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
020-100367-05 Rev. 1 (6-2012)