Christie Entero RPMWU User Manual page 206

Appendix D: Serial Command Reference
(UID) USER ID
CONTROL GROUP:
DESCRIPTION
Allows users to login to the serial interface.
SUBCODE
<No Subcode >
EXAMPLES:
(UID "username" "password") - Login a user.
(UID) - Logout the current user, also happens automatically when a new user logs in.
(UID?) - Display the current logged in user and their access level (UID!"username" 01).
(VBL) VIDEO BLACK INPUT
CONTROL GROUP:
DESCRIPTION
This control affects the black level for video signals. Most NTSC video standards include an offset to black which
is useful for setting up CRT projectors. Set this control to 7.5 IRE if the video black level seems excessively
elevated. Set to 0 IRE if video black levels are crushed. This control applies to analog cards with YUV color space
only. Valid values are:
0 = 0 IRE
1 = 7.5 IRE
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(VBL 1) - Set the video black level for main video to 7.5 IRE.
(VBL+MAIN 1) - Set the video black level for main video to 7.5 IRE.
(VBL+IN32 0) - Set the video black level for PIP video to 0 IRE.
(VBL?) - Returns the video black level on main video.
(VRT) VERTICAL POSITION
CONTROL GROUP:
DESCRIPTION
This control sets the vertical position of the image.
SUBCODE
<No Subcode >
EXAMPLE:
(VRT 500) - Set vertical position to 500 on main video.
(VRT?) - Returns the vertical position value on main video.
D-72
Unsaved
SUBCLASS:
Input Power Up
SUBCLASS:
Input Power Down
SUBCLASS:
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
ACCESS LEVEL:
DESCRIPTION OF USE
Get the video black level for Slot x, Input y.
Set the video black level for main video.
Set the video black level for PIP video.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the vertical position for the main image.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
None
Operator
Operator
020-100367-05 Rev. 1 (6-2012)