Christie Entero RPMWU User Manual page 178

Appendix D: Serial Command Reference
(NAM) CHANNEL NAME (Cont'd)
MAIN
PIIP
EXAMPLES:
(NAM?) - Get current active channel name for main video.
(NAM+MAIN?) - Get channel name being used by main.
(NAM+PIIP?) - Get channel name being used by PIP.
(NAM "Test") - Set channel name being used by main to 'Test'.
(NAM+PIIP "Test") - Set channel name being used by PIP to 'Test'.
(NAM+MAIN "Test") - Set channel name being used by main to 'Test'.
(NAM+C001 "Test") - Set channel name for channel 1 to 'Test.'
(NET) NETWORK SETUP
CONTROL GROUP:
DESCRIPTION
Set or request the network setup for this device.
SUBCODE
DOMA
ETH0
GATE
HOST
MAC0
PORT
SUB0
EXAMPLES:
(NET+ETH0 "192.168.1.35") - Set new IP address on the first ethernet controller.
(NET+GATE "192.168.0.1") - Set the gateway.
(NET+SUB0 "255.255.255.0") - Set the subnet mask on the first ethernet controller.
(NET+HOST "MyHostName") - Set the host name.
(NET+DOMA "MyDomainName") - Set the domain name.
(NET+ETH0 ?) - Get IP address from first controller. (NET+ETH0! "192.168.1.35").
(NET+ETH1 ?) - Get IP address from second controller. (NET+ETH1! "192.168.1.36").
(NET+MAC0 ?) - Get MAC address from first controller. (NET+MAC0! "00:12:3F:7B:76:B4").
(NET+GATE ?) - Get default gateway. (NET+GATE! "192.168.0.1").
(NET+PORT 3002) - Set the Port number.
(NET+PORT ?) - Get the Port number. (NET+PORT! 3002).
D-44
Config/Preference
SUBCLASS:
Set the channel name for the channel being used by main.
Set the channel name for the channel being used by PIP.
Power Down
DESCRIPTION OF USE
Set the domain name
Set the IP address for the first ethernet controller.
Set the network gateway.
Set the host name.
Gets the MAC address of the first ethernet controller.
Set the PORT number.
Set the network subnet mask for the first ethernet controller.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Admin
ACCESS LEVEL:
020-100367-05 Rev. 1 (6-2012)