Christie Entero RPMWU User Manual page 155

(CRM) CHROMA/LUMA DELAY
CONTROL GROUP:
DESCRIPTION
Chroma/Luma delay adjusts the time delay between the chroma and the luminance signals in decoded signals.
Adjust the delay to eliminate shadows occurring with adjacent colors. It is useful only for video images processed
by decoder cards.
SUBCODE
INxy
MAIN
PIIP
EXAMPLES:
(CRM 3) - Set luma delay to 3 pixel on Main video.
(CRM+MAIN 3) - Set luma delay to 3 pixel on Main video.
(CRM+PIP 3) - Set luma delay to 3 pixel on PIP video.
(CRM+IN32 -3) - Set luma delay to -3 pixel on Slot 3, Input 2.
(CRM ?) - Returns the current luma delay on Main video.
(CRM+PIP ?) - Returns the current luma delay on PIP video.
(CRM+IN12 ?) - Returns the current luma delay on Slot 1, Input 2.
(CSP) COLOR SPACE
CONTROL GROUP:
DESCRIPTION
This control specifies which color space the Input signal uses. This determines how the color components are
decoded for accurate color in the display. Color space control only applies to analog Input signals. Although the
proper color space is normally determined automatically by the projector, you can override the setting. Use RGB
unless you are using component video. Use YPbPr(SDTV) for most video sources. Use YPbPr(HDTV) for high
definition signals.
NOTE: When certain RGB signals are first connected, the projector may not initially recognize them as RGB and
may incorrectly decode their color information as YPbPr(SDTV). These signals can include: RGB signals in
NTSC, PAL, SECAM frequency ranges, Scan-doubled sync-on-green, Scan-quadrupled sync-on-green. For these
signals, change the Color Space to RGB, then define a new channel for future use. Values are:
0 = RGB
1 = YPbPr (SDTV)
2 = YPbPr (HDTV)
SUBCODE
INxy
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
020-100367-05 Rev. 1(6-2012)
Input Power Up
SUBCLASS:
Input Power Down
SUBCLASS:
Appendix D: Serial Command Reference
ACCESS LEVEL:
DESCRIPTION OF USE
Set the luma delay on Slot x, Input y to the specified value in
the range of -3 pixel to 3 pixel.
Set the luma delay on the main video to the specified value in
the range -3 pixel to 3 pixel.
Set the luma delay on the PIP video to the specified value in
the range of -3 pixel to 3 pixel.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the color space on Slot x, Input y.
Operator
Operator
D-21