Christie Entero RPMWU User Manual page 156

Appendix D: Serial Command Reference
(CSP) COLOR SPACE (Cont'd)
MAIN
PIIP
EXAMPLES:
(CSP 1) - Set color space to YPbPr(SDTV) on Main video.
(CSP+MAIN 2) - Set color space to YPbPr(HDTV) on Main video.
(CSP+PIIP 1) - Set color space to YPbPr(SDTV) on PIP video.
(CSP+IN32 1) - Set color space to YPbPr(SDTV) on Slot 3, Input 2.
(CSP?) - Returns the current color space value on Main video.
(CSP+PIIP?) - Returns the current color space value on PIP video.
(CSP+IN12?) - Returns the current color space value on Slot 1, Input 2.
(DED) DUAL DVI EDID TYPE SELECTION
CONTROL GROUP:
DESCRIPTION
Set the preferred EDID Timings on the Dual DVI Input card. Available Models are:
0 = Default
1 = 3D
2 = Custom
: 3D option (1) is not supported for Entero or Matrix StIM/SIM.
NOTE
SUBCODE
SLxy
EXAMPLES:
(DED+SL31 1) - Set EDID type to 2 (Custom) on Slot 3, Input 1.
(DED+SL12 ?) - Returns the current EDID type on Slot 1, Input 2.
(DLG) DATA LOGGING
CONTROL GROUP:
DESCRIPTION
Set data logging level.
0 = Minimal logging of activities. Logging system errors, warnings and 'events' (i.e. power ON/OFF, lamp ON/
OFF, user login/logout).
1 = Normal logging. Most activities logged - errors, warnings, events, and other info.
2 = Debug logging. All activities are logged.
SUBCODE
<No Subcode >
EXAMPLES:
(DLG1) - Set current logging level to 1.
(DLG?) - Get current logging level. Response is (DLG!001).
D-22
Option Power Up
SUBCLASS:
Preference
SUBCLASS:
Set the color space on Main video.
Set the color space on PIP video.
ACCESS LEVEL:
DESCRIPTION OF USE
Set the EDID timings on Slot x to the specified type.
Power Down
ACCESS LEVEL:
DESCRIPTION OF USE
There are 3 levels for data logging.
Entero RPMWU/RPMSP/RPMHD-LED01 User Manual
Operator
Operator
020-100367-05 Rev. 1 (6-2012)