NEC Univerge SV8100 Features And Specifications Manual page 810

Issue 12.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
IP Multiline Station (SIP):
Program
Program Name
Number
10-12-01 CD-CP00-US Network Setup – IP
Address
10-12-03 CD-CP00-US Network Setup –
Default Gateway
10-12-09 CD-CP00-US Network Setup – IP
Address
2 - 780
Description/Comments
Assign the IP Address for the CPU
NIC card.
When an IPLA/IPLB card is
installed in the system, it is
recommended to set this Program
to 0.0.0.0.
Assign the default gateway IP
address for the CD-CP00-US.
Set IP address for IPLA/IPLB.

The IP Address assigned in
Program 10-12-01 cannot
start with the same leading
digits as the IP Address
assigned here.
UNIVERGE SV8100
Assigned Data
1
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 172.16.0.10)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.254.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 172.16.0.10)
IP Multiline Station (SIP)
Level
2 3