NEC Univerge SV8100 Features And Specifications Manual page 775

UNIVERGE SV8100
Program
Program Name
Number
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
20-13-40 Class of Service Options
(Supplementary Service) – Do
Not Disturb
20-15-10 Ring Cycle Setup – Alarm for
SLT
20-17-01 Operator Extension – Operator's
Extension Number
20-35-01 Extension's Operator Setting
30-01-01 DSS Console Operating Mode
30-02-01 DSS Console Extension
Assignment – Extension Number
30-03-01 DSS Console Key Assignment
Hotel/Motel
Description/Comments
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Turn Off or On the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
Turn Off or On an extension user
ability to set or cancel Do Not
Disturb.
Define the ring cycle for Alarm for
SLT terminals.
Define the extension numbers
used by operators.
Assign an extension to an
operator group.
Set the mode of the system DSS
Consoles. This option applies to
all system DSS Consoles.
Define the extension number for
the multiline terminal connected
with the DSS console (up to eight
digits).
Customize DSS Console keys to
function as DSS keys, Service
Code keys, Programmable
Function Keys, and One-Touch
Calling keys. The key [when
defined as a DSS/One-Touch key
(code 01)] can have any function
up to four digits (e.g., extension
number or Service Code). The
function information (such as
extension number or Service
Code) would then be entered as
the additional data.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Ringing Cycle = 1~13
(default = 5)
Up to eight digits
(default = 101)
0~15
(default = 0)
0 = Business Mode
1 = Hotel Mode
2 = ACD Monitor Mode

3 = Business/ACD
Mode
(default = 0)
Up to eight digits.
(default not assigned)
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:

1~8 Door Box No.)
00 ~ 99
 
(Appearance
Functional Level)
Issue 12.0
Level
2 3








2 - 745