NEC Univerge SV8100 Features And Specifications Manual page 748

Issue 12.0
Required Component(s)
Headset
Related Features
Handsfree Answerback/Forced Intercom Ringing
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-62 Service Code Setup (for Setup/
Entry Operation) – Headset Ring
Volume Adjustment
15-02-41 Multiline Telephone Basic Data
Setup – Incoming Ring Setup
15-02-42 Multiline Telephone Basic Data
Setup – Incoming Off-Hook Ring
Setup
2 - 718
Description/Comments
If needed, change the service
code used to adjust the Headset
Ring Volume.
Determine if incoming calls ring
the speaker or headset.
Determine if incoming off-hook
ringing rings the speaker or the
headset.
UNIVERGE SV8100
Assigned Data
1
MLT

(default = 662)
0 = Speaker Normal
Ring
1 = Headset Ring
(default = 0)
0 = Speaker Off-Hook
Ring
1 = Headset Off-Hook
Ring
(default = 0)
Headset Operation
Level
2 3

