NEC Univerge SV8100 Features And Specifications Manual page 783

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
15-02-22 Multiline Telephone Basic Data
Setup – Multiple Incoming From
Intercom and Trunk
20-06-01 Class of Service for Extensions
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Hotline
Description/Comments
Assign a function key for Hotline
(code 01 + partner's extension
number).
When this option is Disabled,
incoming calls to an extension
indicate on any Hotline key for that
extension as solid (busy). When
this option is Enabled, lighting is
determined by the setting of
Program 22-01-01 Incoming Call
Priority. If set to trunk (1), the
Hotline key lights solid when a
trunk call rings in. If set to intercom
(0), the Hotline key does not light
for incoming trunk calls, but lights
solid for intercom calls.
Assign a Class of Service to
extensions (1~15).
Turn Off or On Hotline
(Ringdown). If disabled in COS,
the settings in Program 21-11
below have no effect.
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 12.0
Level
2 3



2 - 753