Wac Customize Page - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To view this window, click Security > Web-based Access Control (WAC) > WAC Authentication State as
shown below:
The fields that can be configured are described below:
Parameter
Port List
Authenticated
Authenticating
Blocked
Click the Find button to locate a specific entry based on the information entered.
Click the Clear by Port button to remove entry based on the port list entered.
Click the View All Hosts button to display all the existing entries.
Click the Clear All Hosts button to remove all the entries listed.

WAC Customize Page

This window is used to customize the authenticate page elements.
To view this window, click Security > Web-based Access Control (WAC) > WAC Customize Page as shown
below:
Figure 9-39 WAC Authentication State window
Description
Enter a port or range of ports, and tick the appropriate check box(s), Authenticated,
Authenticating, and Blocked.
Tick this check box to clear all authenticated users for a port.
Tick this check box to clear all authenticating users for a port.
Tick this check box to clear all blocked users for a port.
417